-Other Countries: Search for FM frequencies in 50 kHz increments between 87.50 MHz~108.00 MHz. FM region can be deleted or changed according to the target region of the player. If you change the FM region, the previously stored radio frequencies are deleted. ENG . 49 Settings Setting the System (Continued) : Returns all settings to the default value. : You can check the firmware version, memory capacity and file number. Firmware Version : Displays the current firmware version. Memory : Indicates the remaining memory capacity. indicates the usage, indicates the remaining capacity and indicates the total memory capacity. Files : indicates the number of music files, for the number of photos, for the number of texts, and for the number of entire files. Default Set Resume Beep Volume Limit FM Region Default Set About System 1 Tap [ ] to select and then tap [ ]. The Confirmation window will appear. 2 Tap [ ] to select and then tap [ ]. : Initializes all settings to default. : Cancels default settings. Regarding the Built-In Memory The actual built-in memory available is slightly less than indicated as the internal firmware uses a NOTE portion of the memory. Troubleshooting If a malfunction is experienced, check the following. Problem Check points & Troubleshooting ENG Power will not turn on. Buttons do not work. The screen will not turn on. Check if the [HOLD v] switch is in the direction of the arrow position. Check if you tapped the right button, then tap again. v Page 11 Press the Reset hole. If is selected from , the screen display will be turned off. Tap any button to turn on the screen display or check the Display settings. v Page 45 The screen may not be visible under direct sunlight. Power will not turn on if the battery is fully discharged. Recharge the battery and turn on the player again. Press the Reset hole. Power is turning off. Check the battery status. The power is automatically turned off when the battery is fully discharged. Recharge the battery. If is selected from
)
