Votes - 4, Average rating: 3.5
(
)
)
|
manual abstract
Connect the clip headphones to [Q] (Plug in firmly) ■ Using the clip headphones I upper hook O Press on the base of the clip to open it Q Fit the clip from behind so the upper hook comes slightly over the top of the ear and the lower hook fits just behind the earlobe Press [RADIO/BAND] to turn on the radio Press [TUNING MODE] to set to Free Mode. The display in Free Mode is as follows S-XBS TUNED 83.30 Press [RADIO/BAND] to change the band Each time the button is pressed, FM .-> AM D Press [tX> +, « -] to select the frequency of the station + increases frequency - decreases frequency For your reference • Press for over 1 5 seconds to make the frequency change rapidly •“TUNED" is displayed when a station is tuned 7 Adjust the volume ■ To turn off the radio Press {■, OPR OFF] E Putting stations into the channels Frequencies of up to 30 stations can be stored, 20 FM and 10 AM Preparation •Release [HOLD] •Connect the clip headphones as they act as an FM antenna Memory Mode □ Important After putting stations into channels, ensure the unit has a constant power supply Leaving it without batteries or AC power tor more than one minute can clear the memory 1 Press [RADIO/BAND] to turn on the radio. Press [TUNING Memory Mode The display in Memory Mode is as follows ■ Recalling preset stations Preparation • Release [HOLD] MODE] to Set to »Connect the clip headphones to [ft] • Perform steps 1-3 of “Putting stations Into the channels” Memory number r ^JCBS ( ^MEMORlfN TUNED Press [RADIO/BAND] to change the band. Each time the button is pressed, FM <-»AM Put stations into the channels of your choice ©Press [MEMORY/RECALL] The frequency number flashes ©Within 10 seconds Press [W> +,