2 Press or .) repeatedly until “EDIT” flashes in the display, and then press ENTER (ENTER) again. “ :Name” flashes in the display. 3 Press or .) repeatedly until “ :Erase” flashes in the display, and then press ENTER (ENTER). “All Erase?” and “PushENTER” appear alternately in the display. To cancel erasing, press T MARK (T MARK). 4 Press ENTER (ENTER) again. “TOC Edit” flashes in the display, and all the tracks will be erased. When erasing is complete, “BLANKDISC” appears in the display. Adding a track mark You can add track marks so that the part after the new track mark is counted as a new track. The track numbers will increase as follows. 1 3 42 2 31 4 5 Add a track mark Track numbers increase T MARK 1 While playing or pausing an MD, press T MARK on the recorder at the point you want to mark. “MARK ON” appears in the display, and a track mark is added. The track number will increase by one. To add track marks while recording Press T MARK on the recorder at the point you want to add a track mark. Notes • You cannot add track marks during synchro-recording. • T MARK on the remote control does not function during playback. Erasing a track mark When you record with analog (line) input, unnecessary track marks may be recorded where recording level is low. You can erase a track mark to combine the tracks before and after the track mark. The track numbers will change as follows. Erase a track mark 1 3 42 1 2 3 Track numbers decrease XT MARK X. T MARK . 1 While playing the track with the track mark you want to erase, press X to pause. 2 Find the track mark by pressing . slightly. For example, to erase the third track mark, find the beginning of the third track. “00:00” appears in the display. “MARK” appears in the display for 2 seconds. 3 Press T MARK to erase the mark. “MARK OFF” appears in the display. The track mark is erased and the two tracks are combined. z When you erase a track mark, name assigned to the mark is also erased. Moving recorded tracks You can change the order of the recorded tracks. Example Move track C from the third to the second track. Before moving A C DB A B DC After moving ENTER /. T MARK 1 While playing the track you want to move, press ENTER (EDIT for 2 seconds or more). continued 2 Press or .) repeatedly until “EDIT” flashes in the display, and then press ENTER (ENTER) again. “ :Name” flashes in the display and the recorder plays the selected track repeatedly. 3 Press or .) repeatedly until “ :Move” flashes in the display, and then press ENTER (ENTER). For the example above, “MV 003 t 003” appears in the display. 4 Press or .) to select the destination track number. For the example above, “MV 003 t 002” appears in the display. To cancel moving, press T MARK (T MARK). 5 Press ENTER (ENTER) again. The track moves to the selected destination track. Labeling recordings You can name discs while the recorder is stopped, tracks while the recorder is playing, and both while the recorder is recording. Each name can be as long as 200 letters. Each disc can hold up to 1700 alphanumeric letters during playback or stop. Available characters • Capital and small letters of the English alphabet • Numbers 0 to 9 • ! "# $ % & ( ) *. ;< =>?@ _` +– ' , / : _ (space) T MARK /. Labeling a disc during stop 1 Press ENTER (EDIT for 2 seconds or more), press or .) repeatedly until “EDIT” flashes in the display, and then press ENTER (ENTER) again. “ :Name” flashes in the display. continued VOL +/– VOL +/– 2 Press ENTER (ENTER). The disc is ready to be labeled. 3 Press or .) repeatedly to select a letter and press ENTER (ENTER). The selected letter stops flashing and the cursor moves to the next input position. Press To X (CAPS) Switch between capital letters, small letters and marks / numbers. VOL +/– (VOL +/–) Move the cursor to the left or right. or .) Change the letter to the one before / next one. END SEARCH/VOL + (EDIT) Insert a blank space to type in a new letter pressing both buttons together. END SEARCH/VOL – (DELETE) Delete a letter and move back all following letters to the left pressing both buttons together. T MARK (T MARK) Cancel labeling. 4 Repeat step 3 and enter all characters of the label name. To cancel labeling, press T MARK (T MARK). 5 Press ENTER (ENTER) for 2 seconds or more. The track or disc is labeled. Labeling a track during playback 1 Insert a disc and play the track you want to label. 2 Press ENTER (EDIT for 2 seconds or more), press or .) repeatedly until “EDIT” flashes in the display, and then press ENTER (ENTER) again. “ :Name” flashes in the display. 3 Press ENTER (ENTER). The track is ready to be labeled. 4 Follow steps 3 to 5 o...
Login: