Votes - 2, Average rating: 3.5 ( )

Manafacture: Sony File size: 1.83 mb File name: Language of manual:

Adjustable level: “+18 dB” – “0 dB” (z) – “–8 dB” *1 CDX-M50IP/MR50IP only *2 When EQ3 is activated. *3 When the audio output is set to “SUB” (page 16). *4 When AUX source is activated. Customizing the equalizer curve — EQ3 Adjusting setup items — SET “CUSTOM” of EQ3 allows you to make your 1 Press and hold the select button. own equalizer settings. The setup display appears. 1 Select a source, then press the select button repeatedly to select “EQ3.” 2 Rotate the volume control dial to select “CUSTOM.” 3 Press the select button repeatedly until “LOW,” “MID” or “HI” appears. 4 Rotate the volume control dial to adjust the selected item. The volume level is adjustable in 1 dB steps, from –10 dB to +10 dB. Repeat steps 3 and 4 to adjust the equalizer curve. To restore the factory-set equalizer curve, press and hold the select button before the setting is complete. After 3 seconds, the setting is complete and the display returns to normal play/reception mode. Tip Other equalizer types are also adjustable. 2 Press the select button repeatedly until the desired item appears. 3 Rotate the volume control dial to select the setting (example “ON” or “OFF”). 4 Press and hold the select button. The setup is complete and the display returns to normal play/reception mode. Note Displayed items will differ, depending on the source and setting. The following items can be set (follow the page reference for details): “z” indicates the default settings. CLOCK-ADJ (Clock Adjust) (page 6) CT*1 (Clock Time) To set “CT-ON” or “CT-OFF” (z) (page 12, 13). BEEP To set “BEEP-ON” (z) or “BEEP-OFF.” AUX-A*2 (AUX Audio) To turn the AUX source display “AUX-A-ON” (z) or “AUX-A-OFF” (page 17). A.OFF (Auto Off) To shut off automatically after a desired time when the unit is turned off, – “A.OFF-NO” (z), “A.OFF-30S (Seconds),” “A.OFF-30M (Minutes)” or “A.OFF-60M (Minutes).” REAR/SUB*2 To switch the audio output. –“REAR-OUT” (z): to output to a power amplifier. – “SUB-OUT”: to output to a subwoofer. DEMO (Demonstration) To set “DEMO-ON” (z) or “DEMO-OFF.” DIMMER To change the brightness of the display. – “DIMMER-AT” (z): to dim the display automatically when you turn lights on. – “DIMMER-OFF”: to deactivate the dimmer. – “DIMMER-ON”: to dim the display. CONTRAST To adjust the contrast of the display. The contrast level is adjustable in 7 steps. ILLUMI (Illumination) To change the illumination color: “ILLUMI-1” (z) or “ILLUMI-2.” M.DSPL (Motion Display) To select the Motion Display mode. – “M.DSPL-SA” (z): to show moving patterns and spectrum analyzer. – “M.DSPL-ON”: to show moving patterns. – “M.DSPL-OFF”: to deactivate the Motion Display. A.SCRL (Auto Scroll) To scroll long displayed item automatically when the disc/album/track is changed. –“A.SCRL-ON” (z): to scroll. – “A.SCRL-OFF”: to not scroll. LOCAL (Local Seek Mode) – “LOCAL-ON” : to only tune into stations with stronger signals. – “LOCAL-OFF” (z): to tune normal reception. MONO*3 (Monaural Mode) To improve poor FM reception, select monaural reception mode. – “MONO-ON” : to hear stereo broadcast in monaural. – “MONO-OFF” (z): to hear stereo broadcast in stereo. REG*1*3 (Regional) To set “REG-ON” (z) or “REG-OFF” (page 13). LPF*4 (Low Pass Filter) To select the subwoofer cut-off frequency: “LPF OFF” (z), “LPF125Hz” or “LPF 78Hz.” LOUD (Loudness) To allow you to listen clearly at low volume levels. – “LOUD-ON” : to reinforce bass and treble. – “LOUD-OFF” (z): to not reinforce bass and treble. BTM (page 11) *1 CDX-MR50IP only *2 When the unit is turned off. *3 When FM is received. *4 When the audio output is set to “SUB.” Using optional equipment Auxiliary audio equipment By connecting an optional portable audio device to the AUX input jack (stereo mini jack) on the unit and then simply selecting the source, you can listen on your boat’s speakers. The volume level is adjustable for any difference between the unit and the portable audio device. Follow the procedure below: Connecting the portable audio device 1 Turn off the portable audio device. 2 Turn down the volume on the unit. 3 Connect to the unit. AUX AUX Connecting cord* (not supplied) * Be sure to use a straight type plug. Adjust the volume level Be sure to adjust the volume for each connected audio device before playback. 1 Turn down the volume on the unit. 2 Press (SOURCE) repeatedly until “AUX” appears. “AUX FRONT IN” appears. 3 Start playback of the portable audio device at a moderate volume. 4 Set your usual listening volume on the unit. 5 Adjust the input level (page 15). CD/MD changer Selecting the changer 1 Press (SOURCE) repeatedly until “CD” or “MD” appears. 2 Press (MODE) repeatedly until the desired changer appears. Unit number Disc number Playback starts. Skipping albums and discs 1 During playback, press (ALBM) +/–. To skip Press (ALBM) album and release (hold for a moment). album within 2 seconds of first continuously releasing. discs repeatedly. discs then, press again within 2 continuously seconds and hold. Repeat an...

Download now

Please, enter two numbers from picture: