Votes - , Average rating:
(
)
)
Manafacture: Sony
File size: 613.88 kb
File name:
Language of manual:
The document is loading, please wait
 |
The document is loading, please wait
manual abstract
z If you want to check the remaining time or the recording position while recording or in stop mode, see page 27. Editing recorded tracks You can edit your recordings by adding/ erasing track marks or labeling tracks and MDs. Premastered MDs cannot be edited. Notes on editing • You cannot edit tracks on an MD that is record-protected. Before editing tracks, close the tab on the side of the MD (page 61). • If you perform an editing operation while playing, be sure not to turn the power off until “Edit” disappears in the display. • Do not move the recorder while “Edit” is flashing in the display. • The lid will not open until “Edit” disappears in the display after editing. • When group mode is on, editing can be performed only for the tracks registered into the selected group. Labeling/relabeling recordings You can name tracks, groups and discs using the recorder’s character palette. Available characters • Capital and small letters of the English alphabet • Numbers 0 to 9 • ! " # $ % & ( ) * . ; < = > ? @ _` + – ' , / : _(space) Numbers of characters you can input Track, group, or disc name: Approx. 200 each Numbers of characters you can input in a disc Numbers/marks: Approx. 1,700 Notes • “FULL” appears when you try to enter more than 1,700 characters on a disc. Enter a shorter name for the track, group, or disc, or set the “LPStmp” setting to “OFF” when recording in MDLP mode so that “LP:” is not be added at the beginning of the track name (page 22). • When labeling a disc which has been recorded using the group function, make sure group mode is on in order to prevent the group management information from being overwritten by mistake. • If you enter the symbol “//” between the characters in disc names such as “abc//def”, you may be unable to use the group function. GROUP/ END CANCEL SEARCH VOL +, – >, ., MENU/ X ENTER Labeling recordings 1 Insert a disc and do the following operations: To label a track Start playing or recording a track you want to label, and label the track while playing or recording operations. To label a group Turn group mode on (page 23) and start playing or recording a track within the group you want to label, and label the group while playing or recording operations. To label a disc If a disc is already recorded, follow the procedures from step 2 while the recorder is stopped. If a disc is new, start recording and label a disc while recording. If you label a disc with group settings, turn group mode on (page 23). 2 Press MENU. 3 Press > or . repeatedly until “EDIT” flashes in the display, and then press ENTER. 4 Press > or . repeatedly until the following item appears in the display, and then press ENTER. When labeling a track “T: Name” When labeling a group “G: Name” When labeling a disc “D: Name” The cursor flashes and the track, group, or disc is ready to be labeled. 5 Press > or . repeatedly to select a letter and press ENTER. The selected letter stops flashing and the cursor moves to the next input position. The buttons used for character input and their functions are listed below: Functions Operations To move the cursor Press VOL +, –. To switch between capital letters, small letters and numbers/ marks Press X. To select a character Press > or .. To enter a letter Press ENTER. To enter a name Press ENTER for 2 second or more. To insert a blank space to type in a new letter Press VOL + and END SEARCH at the same time. To delete a letter and move back all following letters to the left Press VOL – and END SEARCH at the same time. To cancel labeling Press CANCEL. 6 Repeat step 5 and enter all characters of the label name. 7 Press ENTER for 2 seconds or more. The track or disc is labeled. To cancel labeling, Press CANCEL. Notes • When the recording is stopped while labeling a track, a group, or a disc during recording, or when the recording moves on to the next track while labeling a track, the input at that point is entered automatically. • “LP:” is automatically added at the beginning of the track name for tracks recorded in MDLP mode (page 21). 123456789 Relabeling recordings 1 Insert a disc and do the following operations: To relabel a track Start playing a track you want to relabel, and change a track name during playback operation. To relabel a group Turn group mode on (page 23) and start playing or recording a track within the group you want to relabel, and change the group name while playing or recording operations. To relabel a disc If the disc is already recorded, follow the procedures from step 2 while the recorder is stopped. If you relabel a disc with group settings, turn group mode on (page 23). 2 Follow steps 3 to 4 of “Labeling recordings” (page 35) to display a track, group, or disc name. 3 Follow steps 5 to 7 of “Labeling recordings” (page 35), and then keep pressing ENTER for 2 seconds or more. Notes • You cannot label or relabel the premastered disc or blank disc. • The recorder is able to display, but cannot label using Japanese “Katakana” characters. • The recor...
Other models in this manual:Portable Players - MZ-R410 (613.88 kb)
- ()