Login:
Votes - 4, Average rating: 4 ( )

User manual Emerson, model HD7096A

Manafacture: Emerson
File size: 366.9 kb
File name: 4b207b7a-b7d8-cc64-e506-fbbe36564ad7.pdf
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


The “PROG” indicator stops flashing and remains in the display. The player will play the tracks you selected in the programmed order. When the last track has played the player stops and the total tracks and playing time appear. 6.) To cancel programmed playback press the STOP button twice. The program mm will also be canceled if the CD Door is opened or if the power is interrupted. 10 HD7096A_7099A_071403.p65 10 14/7/2003, 10:34 “JOGGABLE” ELECTRONIC ANTI-SKIP PROTECTION This CD player is equipped with an automatic Jog-proof 60 second Electronic Anti- Skip Memory that will eliminate all skipping under normal conditions. This means that you can carry this unit while you are jogging and still enjoy skip free music. When you press the PLAY/PAUSE button to begin playback the player immediately begins to store 60 seconds of music in a solid state memory that is impervious to shock. The player is always reading the disc 60 seconds ahead of the music you are hearing and storing that information in the memory. If the player is subjected to shock or bumps of less than 60 seconds duration you will not notice them at all. If the bumps last longer than 60 seconds the anti-skip memory may be depleted and the player may skip or stop. When playback begins the Jog-proof Anti-Skip indicator begins to flash rapidly in the display. When the Anti-Skip memory contains 60 seconds of music and is “full”, the indicator flashes slowly. If the player is bumped or shaken the indicator again flashes rapidly. The player may skip if the bumps continue. When the bumps stop the memory starts to fill up again and the flashing indicator will slow down. The Jog-proof Anti-Skip System does use additional battery power. Therefore if you are using this player in a stable location where it will not be subject to bumps and shocks, press the ASP button to switch the anti-skip circuitry ‘Off’. The Jog- proof indicator will disappear. This will reduce battery drain and prolong battery life. Note: Each time you begin playing a disc the Jog-proof anti-skip system will turn ‘On’automatically. 11 HD7096A_7099A_071403.p65 11 14/7/2003, 10:34 CONNECTION TO AN EXTERNAL AUDIO SYSTEM You can connect this CD player to a home stereo system, receiver, amplifier, or recorder if desired. Connect the LINE OUT jack of this CD player to the Left/Right Auxiliary Inputs, Line Inputs, or Record Inputs of the external device. The connection cable is NOT included. Set the DBBS(Bass Boost) switch of this CD player to the “OFF”position. Be sure to follow the external source connection instructions for the other equipment as well. 12 HD7096A_7099A_071403.p65 12 14/7/2003, 10:34 USING THE CASSETTE ADAPTER (MODEL: HD7099A only) Compact discs played in this unit can be heard through a cassette deck by using the CD cassette adapter. When listening to a CD in the car, use the CD cassette adapter and DC car cord to play a CD through a car stereo cassette deck. Operating instructions 1.) Press the cord into the groove on top of the cassette adapter so the plug is opposite the end inserted into the cassette deck. The cord should be able to exit the front of the cassette deck. 2.) Insert the cassette adapter plug into the LINE OUT jack of the CD player. 3.) Turn on the car stereo cassette deck, set the deck's volume to a low level and insert the cassette adapter with the THIS SIDE UP label facing upwards. If using an auto-reverse cassette deck, set the direction control as if playing the top side of the cassette adapter or the adapter will not work. 4.) Play the CD and adjust the volume on the car stereo cassette deck. The CD player's Volume control does not affect the volume. 13 HD7096A_7099A_071403.p65 13 14/7/2003, 10:34 USING THE DC CAR CORD (MODEL: HD7099A only) You can save money on batteries by using the DC Car Cord. 1.) Insert the small end of the DC Car Cord into the DC IN 4.5V Input Jack on the CD player. 2.) Insert the large end of the DC Car Cord into the car cigarette lighter socket. NOTES: • Do not use any other DC Car Cord with the unit or use any other CD player with this DC Car Cord. • Unplug the DC Car Cord from the cigarette lighter when not in use to avoid draining the car's battery. • Strong vibrations may cause the CD player to skip on rough surfaces if anti-skip feature is not being used, so position it securely when in the car. • Do not leave on dashboard or exposed to direct sunlight as excessive heat may damage the unit. 14 HD7096A_7099A_071403.p65 14 14/7/2003, 10:34 CARE AND MAINTENANCE CARE AND MAINTENANCE CLEANING THE CABINET Wipe with a soft cloth. If the cabinet is very dirty, dampen the cloth with a weak solution of neutral detergent and water, and then wipe clean. CLEANING THE LENS A dirty lens will cause sound skipping and, if the lens is very dirty, the CD may not work. Open the disc cover and clean the lens as follows: DUST OR DRY PARTICLES Using a camera lens brush/blower, blow on the lens several times, then wipe it lightly with the brush to re...

Other models in this manual:
Portable Players - HD7099A (366.9 kb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category