Votes - 4, Average rating: 4
(
)
)
|
manual abstract
• If the unit is functional but lamp does not light - lamp may require replacing. • If after trying this solution you still have a problem contact your dealer or CHAUVET. Contact Chauvet USA Tecnical Assistance: 1-800-762-1084 (954) 929-1115 E-Mail tech@chauvetlighting.com Europe Technical Assistance: (0113) 276-0755 E-Mail eurosales@chauvetlighting.com Caution Do not obstruct the air vents. Do not touch unit or lamps while hot. Never put any objects through the air grill on the top of the unit. No user serviceable parts inside, please refer to CHAUVET for service. Power Connections The unit is supplied with a power plug appropriate to its voltage and destination. Should any other connections be required they must be carried out with the following configuration. Earth = Green/Yellow cable Neutral = Blue cable Live = Brown cable In the USA & Europe, it is required that all plugs are 3-pin type i.e. with Earth/Ground connection. In the UK, it is required that all mains plugs are fitted with 5A fuses. Technical Specifications Power Fuse Lamps Dimensions Weight 120V~60Hz AC 20mm Glass 1A Fast Blow 4 x 12V 20W Part No MR11 12v 20W 279mm x 279mm x 160mm / 11in x 11in x 6.3in 5kg / 11lbs User Informtion (Please complete for your records) Bob Flame Light CH-BOB User Guide Please read these instructions carefully befor use 230V~50Hz AC 20mm Glass 0.6A Fast Blow 4 x 12V 20W Part No MR11 12v 20W 279mm x 279mm x 160mm / 11in x 11in x 6.3in 5kg / 11lbs World-wide Headquarters: 3000 North 29th Ct., Hollywood, Florida, USA, FL 33020 Tel: +1-954-929-1115 Fax: +1-954-929-5560 European Office: Unit 18, Hunslet Trading Estate, Leeds, UK LS10 1BL Tel: (0113) 276-0755 Fax: (0113) 277-6675 Date Purchased: / / Serial No: ________________ Dealer Stamp Model: CH-BOB FLAME LIGHT On Unit: • Flame Cloth • Screws for Lamp Cover • Fan • Fuse Holder • Leg Attach area Hanging Chain Fig. 1 On Unit: • Flame Cloth • Screws for Lamp Cover • Fan • Fuse Holder • Leg Attach area Hanging Chain Fig. 1 Introduction Congratulations on the purchase of your new CHAUVET lighting effect. We are confident you will enjoy many trouble free hours with this unit. To assist with the care and use of the product we have prepared this short guide. Operation Before connecting this unit to the mains power supply for the first time you must first install the lamps. (See ‘Replacing Lamps’ for details) and the simulated flame cloth. This lighting effect has been designed to function on a mains power supply of either 120V~60Hz or 230V~50Hz and has been fitted with a suitable power plug for use with your local voltage. Check the label and voltage selector switch (if fitted) on the unit and the power plug for the correct voltage. When connected to the mains power supply the unit should illuminate. The fan will also start to blow. Due to the high operating temperature of halogen lamps it is advisable that the effect be used in well ventilated areas taking care not to obstruct the air vents. After use allow time to ‘cool’ for safety and to ensure lamp life before moving or touching. The simulated flame cloth has two magnets attached. The magnets should be affixed to the two metal plates above the air grill. Installation / Mounting This unit is designed to be used either standing on three legs or hanging. The three legs attach easily to the bottom of the unit by means of two screws each. The screws will be found separately in a plastic bag. Alternatively, you can hang the unit by means of the included chain. The chain affixes to the unit by means of tree clips. Be careful to properly secure the chain when hanging the unit. Use in a well-ventilated area without obstruction to air vents. Replacing Lamps 1. Disconnect from main power supply before attempting to replace either lamps or fuse. 2. Ensure that the unit is sufficiently cool, before removing blown lamps. 3. Never touch new lamps with your fingers; use a tissue or a cloth. In order to replace the lamps, disconnect from main power supply first, and unscrew the three screws on the side of the unit, which are highlighted on the diagram (fig.1). Only use the appropriately rated lamps as use of any other lamp type may cause the unit to be non-operational. Due to the nature of halogen lamps it is vitally important that you do not touch the new replacement lamp with your fingers, as this will reduce lamp life considerably. Once again a tissue or cloth can be used for fitting the replacement lamp. Finally before using, check that the lamps are housed correctly in the lamp holder and that the top has been screwed back into place. If after replacement of the lamp, the unit is still not working then please contact your dealer or CHAUVET for servicing. Replacing Fuses If the unit does not function at all when connected to the main power supply i.e. the fan does not blow, then it is highly likely that the fuse has blown. Disconnect from main power supply before attempting to replace either lamps or fuse. I...