It can be your personal window on the universe or allows you to intimately study the behavior of nesting birds on a distant hillside. The telescope is shipped with the following parts: • Optical tube • Aluminum tripod with an accessory tray • Two 1.25" eyepieces: MA25mm (28X), MH9mm • 2x 1.25" Barlow lens • Diagonal mirror • 5x24mm viewfinder with bracket • Telescope mount • Hardware used in the assembly: 3 bolts (2" long) with wing nuts and washers 3 screws (1/2" long) with nuts The tube has a

To disable the proximity sensor press SL and “+” simultaneously. In order to turn the proximity sensor back on, press SL and “+” simultaneously again. NOTE: The scope is capable of running in SLEEP mode for more than 10 (ten) days and is ready for use at any moment. Remember, you don’t have to turn the unit off while you are using it (“Smart” sight remembers all the settings). Use the master ON/OFF switch only to store the scope. PROXIMITY SENSOR If you turn the proximity sensor on it will activ

18 • Water-resistant • Built-in powerful I/R illuminator (good for over 200 m) • Automatic brightness protection • Camera/video adaptable • Precision internal windage/elevation adjustments • Standard weaver mount or optional weaver rail or side rail mounts • Long eye relief • Low power consumption. Standard and commonly available 2AA batteries ensure nonstop operation of the device for no less than 50 hours. • Compact size and light weight • Shockproof plastic case CONTENTS 1. Brief description

2. Selection of Prism Constant : [PRISM CONST] Select whether the Prism Constant to be input is set to 0 mm, - 30mm or to an arbitrary value to be entered from the keyboard. 3. Selection of Reflector sheet Constant : [SHEET CONST] Select whether the target constant to be input is set to 0 mm, or to an arbitrary value to be entered from the keyboard. 4. Selection for Refraction & Curvature Corrections : [CRV/REF CORR] Select whether the correction factor to be input for both differences (Refracti

(Note, actual selected than 1/4 turn. alignment screw will vary.) If the alignment screw is a large screw First, using the 3mm Allen wrench, turn the large screw clockwise a small amount, no more than a 1/4 turn. (Figure 4a) Now, with the 2mm Allen wrench turn the two adjacent small screws (Figure 4b) counterclockwise no more than 1/4 turn. Locate the small screw that is 180° opposite the first screw (Figure 4c) and turn it clockwise no more than 1/4 turn. Figure 4c: Turn the small Figure 4d: Tu

WHEN OBSERVING DURING THE DAYTIME, DO NOT POINT THE TELESCOPE EVEN CLOSE TO THE SUN. DO NOT PLUG OR UNPLUG THE KEYPAD FROM THE POWER PANEL OF THE TELESCOPE WHILE THE POWER IS ON. ALL MEADE TELESCOPES ARE UNDER CONTINUOUS TECHNICAL REVIEW, AND SPECIFICATIONS MAY BE CHANGED WITHOUT NOTICE. WE RESERVE THE RIGHT TO SHIP OUR LATEST MODELS. Meade telescopes, spotting scopes, and accessories are warranted to be free of defects in materials and workmanship for a period of ONE YEAR from the date of or

Department of Commerce. Illegal export of these commodities is strictly prohibited. AMERICAN TECHNOLOGIES NETWORK CORP. 0.25mtoInfinityfocusOne1.5voltbattery+5/-6DiopterRotatingrubbereyepiece0.25mtoInfinityfocusOne1.5voltbattery+5/-6DiopterRotatingrubbereyepiece 24mm F 1:1.2 lens for maximum clarity Built-in infra-red Single switch illuminatorbuttonoperationMountingthreadProtectivecover/ daylightfilter The following image intensifier tube configurations are available for this unit: Model Number

Q: Dark spots on screen. S: This may be dust on the lens, please clean according to instrutions. They may also be Cosmetic blemishes in the intensifier tube which are a by-product of the manufacturing process. This is normal and will not affect the life or performance of the unit. Q: Image not clear. S: Adjust focus ring. If problem persists, increase viewing distance Q: Fixed-pattern noise in a honeycomb shape. S: Usually a cosmetic blemish characterized by a faint honeycomb-type pattern. This

Linden Ave. Unit 1B, South San Francisco, CA 94Q8Q 8QQ-91Q-2862 65Q-816-Q13Q FAX 65Q-815-Q129 E-mail: info@atncorp.com, sales@atncorp.com

They may also be Cosmetic blemishes in the intensifier tube which are a by-product of the manufacturing process. This is normal and will not affect the life or performance of the unit. Q: Image not clear. S: Adjust focus ring. If problem persists, increase viewing distance Q: Fixed-pattern noise in a honeycomb shape. S: Usually a cosmetic blemish characterized by a faint honeycomb-type pattern. This usually occurs when viewing very bright lights. Adjust the potentiometer, to reduce brightness. Q