Votes - 3, Average rating: 4
(
)
)
|
manual abstract
Do not throw the battery into fire or expose it to heat as there is a risk of Injury if it explodes. P1 PRECAUTIONS REGARDING SAFETY........ CAUTION For security, please do the opening inspection and inspection every a fixed period and adjustment. When the laser beam enters eyes, an unexpected accident might be caused by the blink of eyes. Establish the laser product to avoid the height of eyes of a driving person and walker. Establish an instrument so that laser beam does not hit a reflection thing as a mirror and a glass window. The refection beam of the laser is also harmful in the human body. Besides the time when you measure the distance, cut off the power supply or shade the beam of aperture with caps. Keep the laser product in the place where the person who does not have the product knowledge such as children does not touch by mistake. Destroy the power supply mechanism of the instrument so as not to emit the laser beam when throwing away it. .. Do not remove the handgrip without good reason. If it does come off, be sure to attach it securely to the instrument with screws. If it is not fastened securely, the instrument may fall when you grasp the handgrip, leading to possible injury. .. Do not short the poles of the battery or charger as there is a risk of injury or fire. .. Do not touch any fluid which may leak from the battery as there is a risk of chemical burn injury or reaction. .. Do not insert or remove the electric plug with wet hands as there is a risk of electric shock. .. Do not use the case to stand on as it is slippery and unstable and may cause you to fall, resulting in possible injury. .. Be sure the tripod itself and the instrument on the tripod are both installed securely as insecure installation may cause the tripod to fall over or the instrument to drop, resulting in possible injury. .. Do not carry the tripod with the metal shoe pointing toward another person as the person may be injured if they strike him or her. .. The instrument contains a rechargeable battery and it is rechargeable. .. At the end of its useful life, it may be illegal to dispose of the battery. .. Check with your local solid waste officials for details for recycling. .. P2 Usage Precautions Surveying instruments are high-precision instruments. In order to assure that the Electronic Total Station R-300 series product which you have purchased will provide long-lasting maximum performance, the precautions in this manual must be followed. Be sure to follow these instructions and use this product properly at all times. [Solar Observation] WARNING Never view the sun directly using the telescope as this may result in loss of sight. Never point the objective lens directly at the sun as this may damage internal components. When using the instrument for solar observation, be sure to attach the special solar filter (MU64) designed for this product to the objective lens. [Laser Beam] Do not stare into laser beam. R-300 is a class-II Laser product. The reflectorless type is a Class IIIa (3R) laser product. [EDM axis] The R series EDM is the red visible laser beam and the beam diameter is very small. The beam is emitted from the objective center. The EDM axis is designed to coincide with the telescope sight axis but both axes may not sometimes coincide slightly according to the intense temperature change and time lapse. [Target Constant] Confirm the Target Constant of the instrument before measurement. If a different constant is to be used, use the correct constant of the target. The constant is stored in the instrument's memory when turned off. [Reflectorless and Reflector sheet] .. The measurement range is determined by the white side of the Kodak Gray Card facing the instrument and by its surrounding brightness. There is a possibility that the range may vary when the tar...
Other models in this manual:Optical Devices - R-315N (244.16 kb)
Optical Devices - R-322N (244.16 kb)
Optical Devices - R-323N (244.16 kb)
Optical Devices - R-325N (244.16 kb)