Operating the machine with an improper oil level can damage engine components. Check the oil level with the engine off. 1 Check the oil dipstick. Gasoline/LPG Engine: located above the bellhousing on the bulkhead side of the engine. Diesel Engine: located on the engine block near the engine oil filter. Result: The oil level should be at the full mark on the dipstick. Add oil as needed. Ford LRG-425 EFI Engine Oil capacity (including filter) 4.5 quarts 4.3 liters Oil viscosity requirements below

11. 12. 13. 103125 200300 2003PR 2003VB BOLT 5/16-18 X 1.25 SHCS PLUG 1/4-18NPT SCHD PLUG VENT 5PSIV/N005677 BUSHING 1/4NPT X 1/8 NPT * * IMPORTANT NOTES: 1. Use S.A.E 80/90 wt. GL-5 lube. 2. Oil capacity = 6 oz. 07/25/07 4220ST & 4420ST Utility Vehicles Treker 700-504P 57 Table of Contents Part Number Index Land Pride Section 7: Air Filtration TREKER 20 SERIES Air Cleaner Applies to 4220ST, 4420ST 58 4220ST & 4420ST Utility Vehicles Treker 700-504P 07/25/07 Section 7: Air Filtration Table of Co

5. 710-097D KEY 3/16 X 3 6. 790-001A TREKER ENGINE/TRANS ALIGNMENT Optional 7. 800-235C SPRING CLAMP 1" OD HOSE 8. 800-259C CLAMP WRM DRV#36SS (1.81-2.75) 9. 800-350C KEY .187 X .247 X 2.5 LG 10. 801-180C TPHMS Y 1/4-20X3/4 YELLOW DIE 11. 801-197C HSFHCS 5/16-24 X 3/4, BLK 12. 801-199C SCR SELF TAP #10 X 3/4 13. 802-005C HHCS 1/4-20X1 GR5 14. 802-320C HHCS 1/2-20X2 GR5 15. 802-738C HHCS 5/16-18X1 GR5 YELLOW DIE 16. 802-770C HHCS 3/8-24X3 1/2 GR5 PLT 17. N/A INSERT, 1/4-20 ARS4-420-280 Included w

. ... . Frontier also offers the RB2060L Rear Blade for tractors with Limited Category 1 hitches. Ask your dealer for details. Model Number RB2060 RB2072 RB2084 Duty Standard Standard Standard Tractor horsepower 19 to 45 hp 23 to 55 hp 27 to 55 hp Hitch Category 1 (iMatch compatible) Category 1 (iMatch compatible) Category 1 (iMatch compatible) Working width 60 in. (1.5 m) 72 in. (1.8 m) 84 in. (2.1 m) Angle, tilt, offset Manually adjusted angle and tilt Manually adjusted angle, tilt, an

• Frame ground – Do not allow tools or other metal objects to contact frame when disconnecting batteries or other electrical wiring. Never allow a positive wire to touch the vehicle frame, engine, or other metal component. PERIODIC SERVICE SCHEDULES See General Warnings on page 10. y WARNING • Service, repairs, and adjustments must be made per instructions in the maintenance and service manual. NOTE: If the vehicle is constantly subjected to heavy use or severe operating conditions, the preventi

Result: The machine should move in the direction that the blue arrow points on the drive chassis, then come to an abrupt stop. 48 Slowly move the drive control handle in the direction indicated by the yellow arrow on the control panel until the machine begins to move, then return the handle to the center position. Result: The machine should move in the direction that the yellow arrow points on the drive chassis, then come to an abrupt stop. Note: The drive brakes must be able to hold the machine

front and rear. Inspect condition of tires for wear, deterioration, cuts, and damage. Replace worn, damaged or deteriorated tires before operating machine, using only tires of original size, type and construction. 2.1.4. Check Accelerator Pedal. With engine off, depress pedal fully. The pedal must move freely, and immediately return to original position when released. 2.1.5. Check Engine oil and Transmission fluid. Raise empty cargo bed and carefully secure with prop rod. Add oil as needed to br

ALL RIGHTS RESERVED. Revision 1, 8/5/2005 Manual No. 7063178 TP 400-5030-1-AT-N PAGE 4 GROUP Grounds Cruiser Windshield Kit w/Muffler Table Of Contents WINDSHIELD KIT (UTILITY VEHICLE) 3 Manual No. 7063178 TP 400-5030-1-AT-N Grounds Cruiser Windshield Kit w/Muffier WINDSHIELD KIT (63178) for SNAPPER Grounds Cruiser Series 0 Manual No. 7063178 TP 400-5030-1 -AT-N 4 WINDSHIELD KIT (UTILITY VEHICLE) Grounds Cruiser Windshield Kit w/Muffier Item Part No Qty Description Note 1 70