Votes - 3, Average rating: 3
(
)
)
|
manual abstract
Insert the kabana's 4 curved tube ends into the plug holes on the litter box's top housing, one at a time (E). 3. Lift the kabana's side flap to reveal the looped fabric on the inside of the kabana (F). 4. Insert the transparent tube through the looped fabric of the kabana (G). 5. Insert the transparent tube into the latch of the curved tube end on both ends of the kabana (H). 6. Repeat steps 3 - 5 to assemble the other side of the kabana. 7. Your LitterMaid Kitty Kabana™ is now fully assembled. Care and Cleaning 1. From time to time, wipe the outer surface of the kabana with a damp soft cloth. 2. For a thorough cleaning, remove the kabana from the litter box. 3. Disassemble the kabana for cleaning the same way it was assembled. 4. Kabana may be hosed down or washed with warm, soapy water. 5. Kabana may also be washed in the sink or tub. Important: Do not place the LitterMaid Kitty Kabana™ in the washing machine or the dryer. 6. Once the Kabana is completely dry, reassemble it and place it back on the litter box. Important: Allow the kabana to dry thoroughly before reassembling it. Storing 1. Disassemble the LitterMaid Kitty Kabana™ and store in its box or in a clean, dry place. Applica Consumer Products, Inc. Copyright © 2008 Applica Consumer Products, Inc. Made in People's Republic of China Printed in People's Republic of China 2008/7-22-78E LMT255/ LME9000MW/ LME9250...