Install the four guide screws (two on each side) that you removed from the old drive into the new drive. The screws help guide the drive into its proper position in the bay. 2. Slide the drive into the drive bay 1, making sure to align the guide screws with the guide slots, until it snaps into place. Sliding the Drive into the Drive Cage 3. Reconnect the power and data cables to your drive as indicated in the following illustrations. Hardware Reference Guide 3–9 Computer Upgrades Reconnecting th

sOÎv/Ri: © 2001 Compaq Computer Corporation. COMPAQ, the Compaq logo, and Presario Registered U.S. Patent and Trademark Office. Second Edition July 2001. Connectors and their locations may vary by model. Please match the correct colored plug to coordinating port. * Powered speakers are required. er~-^ d Voltage ’"Voltage is preset to the correct rating. If in doubt, contact your local Power Utility. ♦ / ♦ Registration / ♦ /

Microsoft and Windows are trademarks of Microsoft Corporation. All other product names mentioned herein may be trademarks or registered trademarks of their respective companies. Compaq shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is subject to change without notice. The information in this publication is subject to change without notice and is provided "AS IS" WITHOUT WARRANTY OF ANY KIND. THE ENTIRE RISK ARISING OUT OF THE

Hewlett-Packard® Company makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. HP shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. THE WARRANTY TERMS CONTAINED IN THIS STATEMENT, EXCEPT TO THE EXTENT LAWFULLY PERMITTED, DO NOT EXCLUDE, RESTRICT OR MODIFY AND ARE IN AD

Thank you for choosing Compaq! Please help us provide quality support information by completing and returning this postage-paid questionnaire. 1. Were you able to set up the computer using the setup poster? o Yes o No If not, at what point did you begin to have difficulty? 2. Was the online Reference Guide easy to find? o Yes o No Is it easy to use? o Yes o No If not, why? 3. What computer task(s) will you need the most help with? 4. If you need help with a computer task, where will you get it?

Mouse does not respond to movement or is too slow. Mouse will only move vertically or horizontally. Problem Solution Keyboard connector is 1. On the Windows taskbar, click the Start not properly button. connected. 2. On the Start menu, click Shut Down... The Shut Down Windows dialog box is displayed. 3. Select the Shut down option. 4. Click OK. 5. After the shutdown is complete, reconnect the keyboard to the back of your computer and restart your computer. Programme in use has stopped responding

. Figure 1-2. Front and Right Side Components Table 1-5 Front and Right Side Components Item Component Function 1 Stereo speakers (2) Produce stereo sound. 2 Power/Standby light On: Power is turned on. Off: Power is turned off. Blinking: Computer is in Standby mode. 1–30 Maintenance and Service Guide Product Description Table 1-5 Front and Right Side Components (Continued) Item 3 4 5 6 7 Component Display release latch Battery light Battery bay Optical drive bay Infrared port Function Opens the

No part of this reference guide may be photocopied or reproduced in any form without prior written consent from Compaq Computer Corporation. © 1999 Compaq Computer Corporation. All rights reserved. COMPAQ, AERO and the Compaq logo are registered in the U.S. Patent and Trademark Office. Microsoft, MS, ActiveSync, Active Desktop, Outlook, Windows, Windows NT, and the Windows CE logo are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Compaq Computer Corporation assumes no responsibility for any errors that might appear in this document. The software described in this document is furnished under a license and may be used or copied only in accordance with the terms of such license. No responsibility is assumed for the use or reliability of software or equipment that is not supplied by Compaq Computer Corporation or its affiliated companies. Restricted Rights: Use, duplication, or disclosure by the U.S. Government is subject to

Compaq, the Compaq logo, and Presario are trademarks of Compaq Information Technologies Group, L.P. in the United States and other countries. Microsoft, MS-DOS, Windows, and Windows NT are trademarks of Microsoft Corporation in the United States and other countries. Compaq shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is provided “as is” without warranty of any kind and is subject to change without notice. The warranties for