Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
manual abstract
System Board: Dell XPS M1210 Service Manual
Back to Contents Page
System Board
Dell™ XPS™ M1210 Service Manual
Removing the System Board
Replacing the System Board
Removing the System Board
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product
Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching
an unpainted metal surface (such as the back panel) on the computer.
NOTICE: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your
Computer) before working inside the computer.
The system board's BIOS chip contains the Service Tag, which is also visible on a barcode label on the bottom of the
computer. The replacement kit for the system board includes a CD that provides a utility for transferring the Service Tag to
the replacement system board.
1. Follow the instructions in Before Working Inside Your Computer.
2. Remove the hard drive (see Removing the Hard Drive).
3. Remove the optical drive (see Optical Drive).
4. Remove the memory module accessible from the bottom of the computer (see Removing the Memory Module(s)).
5. Remove any installed WLAN and/or Mobile Broadband Mini-Cards (see Mini-Cards).
6. Remove the hinge cover (see Removing the Hinge Cover).
7. Remove the keyboard (see Keyboard).
8. Remove the memory module accessible from the top of the computer, underneath the keyboard (see Removing the
Memory Module(s)).
9. Remove the display assembly (see Removing the Display Assembly).
10. Remove the palm rest (see Removing the Palm Rest).
11. Remove the modem (see Removing the Modem).
12. Remove the hard drive bay/ExpressCard cage assembly (see Hard Drive Bay/ExpressCard Cage Assembly.
13. Disconnect the modem cable connector from the system board.
14. Disconnect the connector for the internal card with Bluetooth® wireless technology from the system board.
15. Remove the thermal-cooling assembly (see Removing the Thermal-Cooling Assembly).
16. Remove the processor (see Removing the Processor Module).
17. Remove the two M2.5 x 5-mm screws that secure the input/output daughter card to the system board, and remove the
card from the computer base.
18. Remove the system board, slowly easing the connectors out of their access holes on the back and side of the computer
base:
file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/sysboard.htm[2/21/2014 11:15:02 AM]
...Other models in this manual:
Notebooks and Netbooks - XPS M1210 MXC062 (924.35 kb)