Votes - 3, Average rating: 4.3
(
)
)
|
Other manuals for this model:
manual abstract
To erase the registered fingerprints 1 Turn on the computer. 2 Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If the screen does not appear, restart the computer and press the F2 key several times when the VAIO logo appears. 3 Press the < or , key to select Security to display the Security tab. 4 Press the m key to select Clear Fingerprint Data and press the Enter key. 5 At the confirmation prompt, select Continue and press the Enter key. The fingerprint data registered on the fingerprint sensor is erased automatically after your system restarts. Using Peripheral Devices > n 86 N Using Peripheral Devices You can add functionality to your VAIO computer by using the various ports on the computer. . Connecting a Docking Station (page 87) . Connecting External Speakers or Headphones (page 95) . Connecting an External Display (page 96) . Selecting Display Modes (page 101) . Using the Multiple Monitors Function (page 102) . Connecting an External Microphone (page 104) . Connecting a USB Device (page 105) . Connecting an i.LINK Device (page 107) Using Peripheral Devices > Connecting a Docking Station n 87 N Connecting a Docking Station Attaching a docking station enables you to connect additional peripherals to your computer, such as a printer and an external display. Your computer may not be equipped with a docking station connector depending on the model you purchased. See the specifications to find out about the configuration of your computer. A docking station is not supplied with your computer and is available as an optional accessory. Using Peripheral Devices > Connecting a Docking Station n 88 N Locating Ports on the Docking Station A DC IN indicator Illuminates while the docking station is powered. B IN USE indicator (page 92) C UNDOCK button (page 92) D DC IN port (page 89) E USB ports*1 (page 105) F Network (LAN) port (1000BASE-T / 100BASE-TX / 10BASE-T) G DVI-D port*2 (page 96) H MONITOR port (page 96) *1 Compliant with the USB 2.0 standard and support high-/full-/low- speeds. *2 Functional only on models with the NVIDIA video controller. Simultaneous use of the following ports is not possible. -HDMI output port on your computer -DVI-D port on the docking station -MONITOR port on the docking station The docking station can be powered only through the AC adapter supplied with the docking station. Do not unplug the AC adapter from the docking station and the AC outlet while using the docking station. This may cause data damage or hardware malfunctions. ! Using Peripheral Devices > Connecting a Docking Station n 89 N Attaching Your Computer to the Docking Station ! Be sure to install the battery pack before attaching your computer to the docking station. To attach your computer to the docking station ! Be sure to use the AC adapter supplied with the docking station. Do not move your computer when it is attached to the docking station. This may detach the docking station and cause damage to both units. 1 Disconnect all peripherals from the computer. 2 Plug one end of the power cord (1) into the AC adapter (2) and the other end into an AC outlet. 3 Plug the cable connected to the AC adapter (2) into the DC IN port (3) on the docking station (4). Using Peripheral Devices > Connecting a Docking Station n 90 N Slide open the docking station connector cover on the bottom of the computer. Align the rear bottom corners of the computer with the guides on the docking station. Using Peripheral Devices > Connecting a Docking Station n 91 N Gently push down the computer until it clicks into place. Turn on the computer. Using Peripheral Devices > Connecting a Docking Station n 92 N Disconnecting Your Computer from the Docking Station ! Make sure that no devices connected to the docking station are in use before disconnecting your computer. Do not disconnect your computer from the docking station while the IN USE indicator light is lit. Disconnecting the computer while the IN USE indicator is lit may result in loss of unsaved data or a failure of the computer. When the battery pack is running out of power, disconnecting your computer from the docking station may result in loss of unsaved data. Do not disconnect your computer from the docking station during video playback. Be sure to close video playback software before disconnection. Once you have completed the steps in To disconnect your computer from the docking station (page 93), be sure to take your computer off the docking station. Use of the computer while on the docking station may cause unstable operations. Using Peripheral Devices > Connecting a Docking Station n 93 N To disconnect your computer from the docking station Press the UNDOCK button (1) and wait until the IN USE indicator light (2) turns off. . If the IN USE indicator is unlit, you do not have to press the UNDOCK button. Pressing the UNDOCK button while your computer is in a power saving mode brings the computer to Normal mode first, and then initiates the disconnection pr...
Other models in this manual:Notebooks and Netbooks - VPCS13A7E (2.85 mb)
Notebooks and Netbooks - VPCS13C5E (2.85 mb)
Notebooks and Netbooks - VPCS13I7E (2.85 mb)
Notebooks and Netbooks - VPCS13L8E_B (2.85 mb)