Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
manual abstract
2. Install the screws that secure both the hinges in place. 3. Connect the LVDS cable to the system board. 4. Align the WLAN antennae routing cable to its holder and connect the antennae to the WLAN card. 5. Connect the USB board cable. 6. Install the palm rest. 7. Install the keyboard. 8. Install the hinge cover. 9. Install the battery. 10. Follow the procedures in After Working Inside Your Computer. 54 Removing The DC-in Port And The Bracket 20 1. Follow the procedures in Before Working On Your Computer. 2. Remove the battery. 3. Remove the hinge cover. 4. Remove the keyboard. 5. Remove the palm rest. 6. Remove the display assembly 7. Disconnect the DC-in cable from the system board. 8. Remove the screw that secures the DC-in port and bracket. 9. Lift up the DC-in port bracket. 10. Lift up the DC-in port from the computer and remove. Installing The DC-in Port And Bracket 1. Insert the DC-in port and the bracket into its compartment. 2. Align the bracket and tighten the screw that secures the bracket and DC-in port. 3. Connect the DC-in cable to the system board. 4. Install the display assembly. 5. Install the palm rest. 6. Install the keyboard. 7. Install the hinge cover. 8. Install the battery. 9. Follow the procedures in After Working Inside Your Computer. 58 Removing The Display Bezel 21 1. Follow the procedures in Before Working On Your Computer. 2. Remove the battery. 3. Starting from the bottom , pry the bezel inside out from the display assembly and work your way to the right and the left corners of the display bezel. 4. Remove the bezel from the display assembly once all the snaps have been loosened. Installing The Display Bezel 1. Align the display bezel in line with the top cover. 2. Starting from the bottom edge, press downward on the display bezel to engage the tabs. 3. Install the battery. 4. Follow the procedures in After Working Inside Your Computer. Removing The Camera 22 1. Follow the procedures in Before Working On Your Computer. 2. Remove the battery. 3. Remove the display bezel. 4. Disconnect the camera cable from the camera module. 5. Pry the latch, lift up the camera, and remove. Installing The Camera 1. Insert and align the camera module to its compartment. 2. Connect the camera cable to the camera module. 3. Install the display bezel. 4. Install the battery. 5. Follow the procedures in After Working Inside Your Computer. Removing The Display Panel 23 1. Follow the procedures in Before Working On Your Computer. 2. Remove the battery. 3. Remove the hinge cover. 4. Remove the keyboard. 5. Remove the palm rest. 6. Remove the display assembly. 7. Remove the display bezel. 8. Disconnect the camera cable from the camera module. 9. Remove the screws that secure the display brackets and hinges. 10. Release the wireless antennae from the right hinge. 11. Release the LVDS cable from the left hinge. 12. Lift up the display panel and brackets from the display top cover. 13. Remove the screws on the left and right display brackets and remove the display panel. Installing The Display Panel 1. Attach the left and right brackets to the display panel and secure the screws. 2. Insert and route the display cable and wireless antennae to the left and right hinges. 3. Align the display panel with its brackets to the top cover. 4. Align the WLAN antennae routing cable to its holder and connect the antennae to the WLAN card. 5. Install the screws that secure the display panel and the brackets. 6. Connect the camera cable to the camera module. 7. Install the display bezel. 8. Install the display assembly. 9. Install the palm rest. 10. Install the keyboard. 11. Install the hinge cover. 12. Install the battery. 13. Follow the procedures in After Working Inside Your Computer. Removing The Low-VoltageDifferential Signaling (LVDS) Cable 24 1. Follow the procedures in Before Working On Your Computer. 2. Remove the battery. 3. Remove the hinge cover. 4. Remove the keyboard. 5. Remove the optical drive. 6. Remove the palm rest. 7. Remove the display assembly. 8. Remove the display bezel. 9. Remove the display panel. 10. Peel off the tape securing the LVDS cable connection. 11. Disconnect the LVDS cable from the display panel. 12. peel off the entire display cable from the adhesive affixing it to the display panel. Installing The Low-Voltage Differential Signaling (LVDS) Cable 1. Attach the display cable to the display panel. 2. Connect the display cable connector to the display panel and affix the tape to secure it. 3. Install the display panel. 4. Install the display bezel. 5. Install the display assembly. 6. Install the palm rest. 7. Install the optical drive. 8. Install the keyboard. 9. Install the hinge cover. 10. Install the battery. 11. Follow the procedures in After Working Inside Your Computer. 70 Entering System Setup 25 1. Turn on (or restart) your computer. 2. When the blue DELL logo is displayed, you must watch for the F2 prompt to appear. 3. Once the F2 prompt appears, press