Votes - 1, Average rating: 5
(
)
)
|
Other manuals for this model:
manual abstract
CAUTION: The display bezel is extremely fragile. Be careful when removing it to prevent damaging the bezel. 5. Using your fingertips, carefully pry up the inside edge of the display bezel. 6. Lift the display bezel off the display assembly. Replacing the Display Bezel 1. Follow the instructions in Before You Begin. 2. Align the display bezel over the display panel, and gently snap it into place. 3. Replace the two screws that secure the display bezel to the display back cover. 4. Replace the two rubber pads that cover the display bezel screws. 5. Replace the display assembly (see Replacing the Display Assembly). Display Panel Removing the Display Panel 1. Follow the instructions in Before You Begin. 2. Remove the display assembly (see Removing the Display Assembly). 3. Remove the display bezel (see Removing the Display Bezel). 4. Disconnect the camera cable from the connector on the camera module. 5. Remove the four screws that secure the display panel to the display back cover. 6. Lift the display panel off the display back cover. 1 screws (2) 2 rubber pads (2) 3 display bezel CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer. Replacing the Display Panel 1. Follow the instructions in Before You Begin. 2. Place the display panel over the display back cover. 3. Connect the camera cable to the connector on the camera module. 4. Replace the four screws that secure the display panel to the display back cover. 5. Replace the display bezel (see Replacing the Display Bezel). 6. Replace the display assembly (see Replacing the Display Assembly). Display Cable Removing the Display Cable 1. Follow the instructions in Before You Begin. 2. Remove the display assembly (see Removing the Display Assembly). 3. Remove the display bezel (see Removing the Display Bezel). 4. Remove the display panel (see Removing the Display Panel). 5. Turn the display panel over and place it on a clean surface. 6. Pull the pull-tab to disconnect the display cable from the connector on the display panel. 1 screws (4) 2 display panel 3 camera cable connector CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer. 7. Gently peel off the display cable from the display panel. Replacing the Display Cable 1. Follow the instructions in Before You Begin. 2. Adhere the display cable along the edge of the display panel. 3. Connect the display cable to the connector on the display panel. 4. Replace the display panel (see Replacing the Display Panel). 5. Replace the display bezel (see Replacing the Display Bezel). 6. Replace the display assembly (Replacing the Display Assembly). Display Panel Brackets Removing the Display Panel Brackets 1. Follow the instructions in Before You Begin. 2. Remove the display assembly (see Removing the Display Assembly). 3. Remove the display bezel (see Removing the Display Bezel). 4. Remove the display panel (see Removing the Display Panel). 1 display cable 2 pull-tab 3 display-cable connector CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer. 5. Remove the four screws (two on each side) that secure the display panel brackets to the display panel. 6. Remove the display panel brackets off the display panel. Replacing the Display Panel Brackets 1. Follow the instructions in Before You Begin. 2. Place the display panel brackets in position. 3. Replace the four screws (two on each side) that secure the display panel brackets to the display panel. 4. Replace the display panel (see Replacing the Display Panel). 5. Replace the display bezel (see Replacing the Display Bezel). 6. Replace the display assembly (see Replacing the Display Assembly). Back to Contents Page 1 display panel brackets (2) 2 screws (4) CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer. Back to Contents Page Hard Drive Dell™ Inspiron™ 1018 Service Manual Removing the Hard Drive Replacing the Hard Drive Removing the Hard Drive 1. Follow the instructions in Before You Begin. 2. Remove the battery (see Removing the Battery). 3. Remove the keyboard (see Removing the Keyboard). 4. Remove the screw that secures the hard-drive assembly to the system board. 5. Using the pull-tab, slide the hard-drive assembly to the side to disconnect it from the connector on the system board. 6. Lift the hard-drive assembly out of the computer base. 7. Remove the four screws that secure the hard-drive bracket to the hard drive. WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Comp...