Votes - 2, Average rating: 3.5 ( )

Manafacture: Toshiba File size: 3.51 mb File name: Language of manual:

This information applies to all the features and icons described in this guide. Below are examples of some of the many possible icons used on your computer: Sample system icons Turning on the power To turn on the computer: 1 Make sure any external devices (such as the AC adapter, if you plan to use AC power rather than battery power) are properly connected and ready. 2 Check to ensure that all drives are empty. 3 Press and hold the power button in until the on/off light on the system indicator panel glows green—about one second. 54 54 54d Adding memory (optional) Power button Sample turning on the power The preinstalled operating system will load automatically. When you turn on the computer for the first time, do not turn off the power again until the operating system has loaded completely. Adding memory (optional) HINT: To purchase additional memory modules, see the accessories information packaged with your system or visit accessories.toshiba.com. Your computer comes with enough memory to run most of today’s popular applications. You may want to increase the computer’s memory if you use complex software or process large amounts of data. Getting Started Getting Started Adding memory (optional) For more information on memory options, check the accessories information that came with your computer, or visit accessories.toshiba.com. NOTE Before adding external devices or memory, Toshiba recommends setting up your software. See “Setting up your software” on page 45. Installing a memory module Additional memory modules can be installed in the memory module slots on the base of the computer. You will need a standard Phillips No. 1 screwdriver for this procedure. If you use the computer for a long time, the memory module will become hot. If this happens, let the module cool to room temperature before you replace it. To avoid damaging the computer’s screws, use a standard Phillips No. 1 screwdriver that is in good condition. Installing a memory module with the computer’s power on may damage the computer, the module, or both. 56 56 56d Adding memory (optional) The computer has two memory module slots — Slot A and Slot B. You can install one or two memory modules. Before you install or remove a memory module, turn off the computer using the Start menu. If you install or remove a memory module while the computer is in Standby or Hibernation mode, data will be lost. If the computer is on, begin at step 1; otherwise, skip to step 3. 1 If the computer is on, click Start, Turn off. (or shut down - depending on the system) The Turn off computer window appears. 2 Click Turn Off. The operating system turns off the computer. 3 Unplug and remove any cables connected to the computer, including the AC adapter. 4 Remove the battery. For information on removing the battery, see “Charging batteries” on page 109. 5 Close the display panel and turn the computer upside down to loca...

Download now

Please, enter two numbers from picture: