Votes - 3, Average rating: 3.7 ( )

Manafacture: Toshiba File size: 3.83 mb File name: Language of manual:

Utilities Utilities Fingerprint Authentication Utility The Fast User Switching feature of the Windows® operating system is also supported. If user A is logged on and the fingerprint utility verifies the fingerprint of user B (who is already enrolled), the utility recognizes the fingerprint and switches the users. If your system supports power-on security, existing fingerprint samples can be used also for power-on authentication. Care and maintenance of your fingerprint reader Failure to follow these guidelines and/or procedures might result in damage to the reader or cause reader failure, finger recognition problems, or lower finger recognition success rate. . Do not scratch or poke the reader with your nails or any hard or sharp objects. . Do not press the reader with too much pressure. . Do not touch the reader with a wet finger or any wet objects. Keep reader surface dry and free of water vapor. . Do not touch the reader with a soiled finger. Minute foreign particles on a soiled or dirty finger may scratch the reader. . Do not paste stickers or write on the reader. . Do not touch the reader with a finger or any object with built-up static electricity. Observe the following before you swipe your finger on the reader, whether for fingerprint enrollment/registration or recognition. . Wash and dry your hands thoroughly. . Remove static electricity from your fingers by touching any metal surface. Static electricity is a common cause of reader failures, especially during dry seasons such as winter. . Clean the reader with a lint-free cloth. Do not use detergent to clean the reader. . Avoid the following finger conditions for enrollment or recognition as they may result in fingerprint enrollment errors or a drop in the fingerprint recognition success rate. . Soaked or swollen finger (e.g., after taking bath) . Injured finger . Wet finger . Soiled or oily finger . Extremely dry skin condition on finger Utilities Utilities Fingerprint Authentication Utility Observe the following to improve the fingerprint recognition success rate. . Enroll two or more fingers. . Enroll additional fingers if recognition failure occurs often using enrolled fingers. . Check your finger condition. Changed conditions, such as injured, rough, extremely dry, wet, soiled, dirty, oily, soaked or swollen fingers, may lower the recognition success rate. Also if the fingerprint is worn down or the finger becomes thinner or fatter, the recognition success rate may be lowered. . The fingerprint for each finger is different and unique. Please ensure that only the registered or enrolled fingerprint or fingerprints are used for identification. . Check sliding position (see illustration below). (Sample Illustration) Aligning the finger on the reader Fingerprint reader limitations . The fingerprint reader compares and analyzes the unique characteristics in a fingerprint. However, there may be instances where certain users...

Download now

Please, enter two numbers from picture: