|
manual abstract
When you turn on the computer for the first time, do not turn off the power again until the operating system has loaded completely. Getting Started Getting Started Registering your computer with Toshiba Setting up your software When you turn on the computer for the first time, do not turn off the power again until the operating system has loaded completely. NOTE The names of windows displayed, and the order in which windows appear, may vary according to your software setup choices. The first time you turn on your computer, the Setup Wizard guides you through steps to set up your software. Follow the on-screen instructions. Registering your computer with Toshiba Product registration is strongly recommended, and allows Toshiba to send you periodic updates, announcements, and special offers applicable to your product. Product registration can be completed by either visiting the Toshiba Web site at or by clicking Start, All Programs, My Toshiba, and then Toshiba Registration. Failure to complete Product Registration will not diminish Customer rights under the Toshiba standard limited Warranty. NOTE To register online, you must be connected to the Internet. Adding optional external devices NOTE Before adding external devices or memory, Toshiba recommends setting up your software. See “Setting up your software” on page 51. After starting your computer for the first time you may want to: . Add more memory (see “Adding memory (optional)” on page 52) . Connect a mouse (see “Using a mouse” on page 81) . Connect an external keyboard (see “Using an external keyboard” on page 81) . Connect an external monitor (see “Using external display devices” on page 77) . Connect a local printer (see “Connecting a printer” on page 81) 52 52 52d Adding memory (optional) . Install an ExpressCard® (see “Using an ExpressCard®” on page 142) Adding memory (optional) HINT: To purchase additional memory modules, see the accessories information packaged with your system or visit accessories.toshiba.com. Your computer comes with enough memory to run most of today’s popular applications. You may want to increase the computer’s memory if you use complex software or process large amounts of data. NOTE Before adding external devices or memory, Toshiba recommends setting up your software. See “Setting up your software” on page 51. Installing a memory module Memory modules can be installed in the memory module slots on the base of the computer. You will need a small Phillips screwdriver for this procedure. If the computer has been running recently, the memory module(s) may be hot. The surrounding area may also be hot. Allow the module(s) to cool to room temperature before replacing it. Avoid touching the cover, the module(s), and the surrounding area before they have cooled. Failure to follow these directions could result in minor bodily injury. To avoid damaging the computer’s screws, use a small Phillips screwdri...
Other models in this manual:Notebooks and Netbooks - Satellite A500-ST5605 (4.51 mb)
Notebooks and Netbooks - Satellite A500-ST5606 (4.51 mb)
Notebooks and Netbooks - Satellite A500-ST5607 (4.51 mb)
Notebooks and Netbooks - Satellite A500-ST5608 (4.51 mb)