Votes - 3, Average rating: 3.3 ( )

Manafacture: Toshiba File size: 4.11 mb File name: Language of manual:

If Something Goes Wrong 196 Resolving a hardware conflict Special considerations for the Windows® operating system Wired Equivalent Privacy (WEP) encryption is not enabled on the wireless access point. When you install a wireless access point device, the Windows® operating system checks whether WEP encryption is enabled on the device. If it is not enabled, the Windows® operating system adds the device to its list of available wireless networks, but does not create a wireless connection using the device, since the connection would not be secure. You can still, however, use the access point. To use an access point without WEP encryption, follow these steps: 1 Double-click the Wireless Network icon in the Notification Area (far-right portion of the Windows® Taskbar). 2 Click Connect to a network. 3 Select the desired network from the list and click Connect. A message informs you that the selected network is not secure. 4 5 Click Connect Anyway. The Windows® operating system will now try to establish a wireless connection. The Windows® operating system wireless management facility does not work. If you are using an external Wi-Fi® adapter (a PC Card, USB adapter, or other variety), check if the adapter comes with its own management utility. If it does, the utility may be disabling the Windows® operating system wireless management facility, in which case you must use the adapter's management utility. If the documentation that accompanies the adapter does not provide enough information to determine if this is the case, contact that vendor's support group for further advice. If Something Goes Wrong 197 DVD operating problems DVD operating problems If you experience a problem playing DVDs, you may be able to fix the problem yourself. For general problems playing a DVD title, try the following steps: 1 Verify that the disc is in a format that the drive supports. 2 Ensure that the disc is properly inserted in the drive tray. 3 Clean the disc and try again. A dirty drive can also cause audio problems. If you have tried several discs and all fail, consider sending your drive to an authorized service provider to get it cleaned. 4 Verify that your computer recognizes your optical drive by clicking Start, and then Computer. The optical drive should appear in the list. 5 See “Checking device properties” on page 181 for instructions on using Device Manager to view the optical drive properties. 6 Check the Toshiba Web site for new information on optical drives and their operation. A blank screen appears while watching a DVD-ROM movie or title. Change the setting for when to turn off the display using the following steps: 1 Click Start, Control Panel, System and Maintenance, and then Power Options. 2 Click Choose when to turn off the display. 3 Select Never on When to turn off the display. 4 Click Save changes. The screen saver runs while you are watching a movie or title. If the screen saver is enabled, it runs on top of any movie or title you are watchi...

Download now

Please, enter two numbers from picture: