Votes - 2, Average rating: 3
(
)
)
|
manual abstract
7 Press the F5 or F6 key to change the boot device order so that Internal Hard Disk is listed higher than External Device. ! You need to move Internal Optical Drive to the top of the list to recover the computer system using your recovery discs. 8 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key. 9 After your system restarts, select Execute in the confirmation window and then press the Enter key. 10 Follow the instructions in Windows Help and Support to enable BitLocker Drive Encryption. Using Your VAIO Computer > Using the TPM n 89 N 11 Save the recovery password to the USB flash memory device in the window for saving the recovery password. 12 Follow the on-screen instructions. The encryption process will start. ! Updating your BIOS with updating software, such as the VAIO Update, changes the BIOS settings back to the default. You need to repeat the steps above again. It takes several hours to complete the encryption process. Using Peripheral Devices > n 90 N Using Peripheral Devices You can add functionality to your VAIO computer by using the various ports on the computer. . Connecting a Docking Station (page 91) . Connecting External Speakers or Headphones (page 99) . Connecting an External Display (page 100) . Selecting Display Modes (page 107) . Using the Multiple Monitors Function (page 108) . Connecting an External Microphone (page 110) . Connecting a USB Device (page 111) . Connecting an i.LINK Device (page 113) Using Peripheral Devices > Connecting a Docking Station n 91 N Connecting a Docking Station Attaching a docking station enables you to connect additional peripherals to your computer, such as a printer and an external display. A docking station is not supplied with your computer and is available as an optional accessory. Using Peripheral Devices > Connecting a Docking Station n 92 N Locating Ports on the Docking Station ! A DC IN indicator Illuminates while the docking station is powered. B IN USE indicator (page 96) C UNDOCK button (page 96) D DC IN port (page 93) E Network (LAN) port (1000BASE-T / 100BASE-TX / 10BASE-T) (page 56) F Hi-Speed USB (USB 2.0) ports*1 (page 111) G DVI-D port*2 (page 100) H MONITOR port (page 100) *1 Support high-/full-/low- speeds. *2 Functional only while your computer is in SPEED mode. The docking station can be powered only through the AC adapter supplied with your computer. Do not unplug the AC adapter from the docking station and the AC outlet while using the docking station. This may cause data damage or hardware malfunctions. Simultaneous use of the HDMI output port on your computer and the DVI-D port or the MONITOR port on the docking station is not possible. Using Peripheral Devices > Connecting a Docking Station n 93 N Attaching Your Computer to the Docking Station ! Be sure to install the battery pack before attaching your computer to the docking station. To attach your computer to the docking station ! Use the AC adapter supplied with your computer. Do not move your computer when it is attached to the docking station. This may detach the docking station and cause damage to both units. 1 Disconnect all peripherals from the computer. 2 Plug one end of the power cord (1) into the AC adapter (2) and the other end into an AC outlet. 3 Plug the cable connected to the AC adapter (2) into the DC IN port (3) on the docking station (4). Unfold the docking station cover. Using Peripheral Devices > Connecting a Docking Station n 94 N Slide open the docking station connector cover on the bottom of the computer. Align the rear bottom corners of the computer with the guides on the docking station. Using Peripheral Devices > Connecting a Docking Station n 95 N Gently push down the computer until it clicks into place. Turn on the computer. Using Peripheral Devices > Connecting a Docking Station n 96 N Disconnecting Your Computer from the Docking Station ! Make sure that no devices connected to the docking station are in use before disconnecting your computer. Do not disconnect your computer from the docking station while the IN USE indicator light is lit. Disconnecting the computer while the IN USE indicator is lit may result in loss of unsaved data or a failure of the computer. When the battery pack is running out of power, disconnecting your computer from the docking station may result in loss of unsaved data. Do not disconnect your computer from the docking station during video playback. Be sure to close video playback software before disconnection. Once you have completed the steps in To disconnect your computer from the docking station (page 97), be sure to take your computer off the docking station. Use of the computer while on the docking station may cause unstable operations. Using Peripheral Devices > Connecting a Docking Station n 97 N To disconnect your computer from the docking station Press the UNDOCK button (1) and wait until the IN USE indicator light (2) turns off. . If the IN USE indicator is unlit, you do not have...
Other models in this manual:Notebooks and Netbooks - VGN-Z51MG_B (2.97 mb)
Notebooks and Netbooks - VGN-Z51MRG_B (2.97 mb)
Notebooks and Netbooks - VGN-Z51VRG_X (2.97 mb)
Notebooks and Netbooks - VGN-Z51WG_B (2.97 mb)