Votes - 4, Average rating: 4
(
)
)
|
Other manuals for this model:
manual abstract
Push the battery pack down into the compartment until it clicks into place. Slide the battery LOCK switch to the LOCK position to secure the battery pack on the computer. Getting Started > Using the Battery Pack n 21 N To remove the battery pack ! You may lose data if you remove the battery pack while your computer is on and not connected to the AC adapter or if you remove the battery pack while the computer is in Sleep mode. 1 Turn off the computer and close the LCD screen lid. 2 Slide the battery LOCK switch (1) to the unlock position. 3 Slide and hold the battery RELEASE latch (2), put your fingertip underneath the tab (3) on the battery pack, and lift the battery pack in the direction of the arrow, and then slide it away from the computer. ! Certain rechargeable batteries do not meet Sony quality and safety standards. For safety reasons this computer only functions with genuine Sony battery packs designed for this model. If an unauthorized battery pack is installed, the battery will not be charged and the computer will not function. Getting Started > Using the Battery Pack n 22 N Charging the Battery Pack The battery pack supplied with your computer is not fully charged at the time of delivery. To charge the battery pack 1 Install the battery pack. 2 Connect the computer to a power source with the AC adapter. The charge indicator light is on while the battery pack is charging. When the battery pack charges close to the maximum charge level you selected, the charge indicator turns off. Charge indicator status Meaning Lit in orange The battery pack is charging. Blinks along with the green power indicator The battery pack is running out of power. (Normal mode) Blinks along with the orange power indicator The battery pack is running out of power. (Sleep mode) Blinks fast in orange A battery error has occurred due to a failed battery pack or an unlocked battery pack. ! Charge the battery pack as described in this manual from your first battery charge. Getting Started > Using the Battery Pack n 23 N . Keep the battery pack in your computer while it is directly connected to an AC power source. The battery pack continues to charge while you are using the computer. When the battery pack is running out of power and both the charge and power indicator lights blink, you should either connect the AC adapter to recharge the battery pack or shut down your computer and install a fully charged battery pack. Your computer is supplied with a lithium ion battery pack and can be recharged any time. Charging a partially discharged battery pack does not affect the life of battery. While some software applications or peripheral devices are in use, your computer may not enter Hibernate mode even when the remaining battery life becomes short. To avoid loss of data while the computer is running on the battery, you should save your data frequently and manually activate a power management mode, such as Sleep or Hibernate. If the battery pack runs out of power while the c...
Other models in this manual:Notebooks and Netbooks - VPCEA1C5E (2.09 mb)
Notebooks and Netbooks - VPCEA1S1E_B (2.09 mb)
Notebooks and Netbooks - VPCEA1S1E_G (2.09 mb)
Notebooks and Netbooks - VPCEA1S1E_L (2.09 mb)