Votes - 3, Average rating: 4.3
(
)
)
|
manual abstract
There are also specialized devices that may be able to read data that has been erased using this method. If you need to erase highly confidential data, we recommend that you contact a company that specializes in this process. Matsushita Electric Industrial Co., Ltd. will bear no responsibility for losses or damages suffered as a result of the use of this utility. rPreparing-j You will need the Product Recovery DVD-ROM and CD drive. Knote)-- Be sure the AC adaptor is connected until the procedure is completed. This utility can only be used for internal hard disk. It cannot be used to erase data from external hard disks. This utility cannot erase data from damaged disk. This utility cannot erase data for specific partitions. After executing this utility, the computer cannot be booted from the hard disk. ¡-Procedure-] 1 Turn off the computer. 2 Insert the CD drive into the multimedia pocket. (Gr’ “Multimedia Pocket”) 3 Turn the computer on, and press C F2 ) while [Panasonic] boot screen is displayed. The Setup Utility will start up. If the password has been set, enter the Supervisor Password. 4 Select [Boot] menu, then selcct [CD Drive] and pressC F6~*) until [CD Drive] is at the top of the [Boot] menu. 5 Place the Product Recovery DVD-ROM into the CD drive. 6 Press (ED At the confirmation message, select [Yes] and press C Enter ). The computer will restart. 7 Press CD to execute [2. [Erase HDD]]. (You can cancel this operation by pressing OD.) 8 At the confirmation message, press 9 When [<«Start Menu»>] is displayed, press( Enter). 10 The approximate time required for erasing data will be displayed_ Press ( Space ). 11 At the confirmation message, press ( Enter j. The operation of erasing the hard disk starts. (If necessary, the “hard disk data erase” operation can be cancelled after it has begun by pressing ( Ctrl) + fC") . If the operation is cancelled before being completed, a part of data will not be erased.) 12 After the operation is complete: Under normal conditions, the message [Hard disk data has been deleted.] will be displayed. If a problem occurred during the operation, an error message will be displayed. 13 Remove the Product Recovery DVD-ROM, then turn off the computer by using the power switch. 32 WinDVD WinDVD is a software application for DVD playback. Here, you will find explanations and general information on the installation procedure and how to access the online manual. Refer to the online manual concerning the detailed use of the software application ((^= page 35). Running WinDVD tWineJowslXPJ Select [Start] - [All Programs] - [InterVideo WinDVD] - [InterVideo WinDVD] or select ¡E5| on the desktop. 4Winftows}2000)( Select [Start] - [Programs] - [InterVideo WinDVD] - [InterVideo WinDVD] or select on the desktop. rUsage-Precautions1 • Do not enter the standby or hibernation mode, or switch the display by prcssingC Fn ) + C F3 ) while WinDVD is running. • Do not start WinDVD while the hard disk drive indicator is blinking immediately after the computer was started up. • During video playback (while the Multimedia pocket device status indicator (mp) is on), do not perform the following. • Ejecting the disc • Using other applications or the Command Prompt • Changing the settings of the screen properties • If you maximize the video display window, you can return to the original window size by double-clicking over the images. • While WinDVD is running, the volume setting may return to the volume adjusted with the WinDVD when you pause, fast-forward, fast-reverse or skip between chapters since priority is given to the volume adjusted by WinDVD, even if the volume is adjusted using C Fn ) + (~F5 ) / ( F6 ) or the taskbar icon. • Immediately after resuming from a pause, frame dropping may occur depending on the operating environment or DVD video (images or sounds are disrupted). • If you cannot play the disc contents smoothly, right-click on the WinDVD screen, select [Setup]-[Video], and confirm that the check mark is added to [Use Hardware Decode Acceleration] and [Use Hardware Color Acceleration]. The display may flicker, depending on the disc. In this case, delete the check mark for [Use Hardware Decode Acceleration]. • In some cases, when the number of display colors is increased, a message appears and the DVD cannot be played. If this happens, reduce the number of display colors. • In the Extended Desktop or simultaneous (internal/external) display mode, there are times when images or video are not displayed correctly. • During a prolonged period of rapid advance, the pause mode may be established at some point. If this happens, exit WinDVD, and restart. • If you uninstall WinDVD accidentally, re-install it by following the steps below. 1 Set the Product Recovery DVD-ROM in the CD drive. 2 Select [Start] - [Run] and input [d:\windvd\setup.exe]*1, then select [OK]. Follow the on-screen instructions. *' “d:” is the drive letter of the C...