SW225 Voice Projector Amp with built-in receiver, Lapel & Headset mics with transmitter and 2 audio/ computer cables SW124 Amp with built-in VHF receiver, lapel & headset mics with transmitter and 2 audio/computer cables. UHF Wireless mic available. SW222 Amp with built-in receiver, lapel & headset mics with transmitter and 2 audio/computer cables. SW223 comes with a wireless handheld mic. Sound Coverage Up to 5,000 people, 30,000 sq. ft. Up to 1,000 people, 10,000 sq. ft. Up to 3,000 people, 25

Durable molded hard shell with recessed handles. Storage space behind speaker grille. SLA (Sealed Lead Acid) battery fully charged and ready to go with a run time of 20 hours. Includes S1460 AC adapter/ recharger. Expansion Options: UHF Wireless; CD/Digital Player/ Recorder; Cassette Player. Digital Audio Travel Partner with Remote Control! 250W! Complete digital pre amp with 8 channel UHF wireless, built in digital CD/CDR/CDRW/MP3 disc player with pitch control. USB input, 3 Neutrik Combo XLR m

Position flat for computer or leave slanted for notes. Storage shelf. 2 hidden casters. Ideal for board rooms, hotels and churches. Fully assembled computer lectern cart with a 4-in. deep area for a laptop that locks, a slide out locking shelf for projectors and multimedia equipment. Two locking doors and two adjustable inner shelves. Wire management grommets on inside. Moves easily on four, 4-in. casters, 2 locking. Built in flush mount amp. Use SW250 or SW272 alone or set on S260 Media Cart Ba

IL 60062 1 -800-AmpliVox The AmpliVox S1600 wireless microphone system is compact, lightweight and compatible with all AmpliVox and Perma Power Sound Systems currently being produced or that were producedsince 1961. The S1600 operates in an authorized VHF band and has a useful range of up to 200’ in line-of sight applications. Each S1600 system operates on two crystal-controlled, switch- selectable frequencies for clear clean transmission. “A” Channel “B” Channel T6: 171.105 MHz T7: 171.845 MHz

3) Connect the mini-plug audio signal cable from the phone out jack on the receiver to the wireless mic jack on amplifier 4) Attach Antenna by screwing it into socket on top of receiver. Phone Out Jack Wireless Mic Jack 5) Turn the Power ON/OFF switch to the ON position (The LEDindicator will light) HELPFUL HINTS A) If the selected channel is noisy, switch both the transmitter andreceiver to the other channel. C) Low ceiling fluorescent lighting, overhead telephone lines, or close proximity to m

n Built-in Digital UhF 8 channel wireless receiver with choice of lapel, handheld, flesh tone or headset mic with transmitter n wired xLR mic n Built-in Digital cD/cDR/cDRw/mP3 disc player with pitch control n Digital pre amp n USB input n Two 6.5 in. Neo woofers and dynamic compression driver, SPL 136dB n 3 Neutrik combo xLR mic Inputs n mute n Reverb / echo n Talk-over (Ducking) - Automatic reduction of music when mic is used n Voice/music Button n Ac Power cord and rechargeable batteries for

Optional Power Supplies may be substituted: Model S1460, International AC Adapter/Recharger (110/220V, 50/60Hz). Model S1462, 12 Volt DC adapter (automotive cigarette lighter plug- in). Model S1465, NiCad Battery Pack. TO INSTALL OR REPLACE BATTERIES Open carrying case cover. Lift out battery holder from case. Insert 10 new Alkaline “D” cell batteries, be sure to observe polarity, or replace with Model S1465 NiCad battery pack. Carefully replace battery pack. Do not mix battery types or attempt

Unit speaker is wired internally. Plug external speaker into right speaker jack for stereo. Note: when using a stereo AUX source with a single speaker, only one of the stereo channels will be heard, switch stereo/mono switch to mono for both channels to be heard. However, all MIC inputs are heard equally on both channels. PROBLEM SOLVING FEEDBACK is the howl or screech often heard in sound reinforcement systems. It is caused by sound from the loudspeaker returning to the microphone. AmpliVox sys