Votes - 1, Average rating: 4
(
)
)
|
manual abstract
At the lower end of the gooseneck there is an additional area for an open-end wrench to tighten the gooseneck. The microphone is simply put into the MCS 1xxx microphone station and is ready for operation. SHM 21x illuminated ring: (except SHM 214 I and SHM 215 I) The illuminated ring is operated with a series resistance. The current must not exceed 20 mA. Connection: pin 4/white wire: cathode, pin 5/blue wire: anode. In order to avoid interference, we recommend that the audio and the supply for the illuminated ring are individually screened. Important: Apart from the SHM 203 G, SHM 204 G and SHM 205 G microphones, the gooseneck earth is not connected with the microphone earth to avoid humming. Please note that depending on the application it could be necessary to put the gooseneck earth on the same potential. 8 Versions with Switch for Microphone and illuminated Ring, phantom-powered (e.g. SHM 214 I and SHM 215 I) With 3-pin XLR-connector. An XLR flange connector is installed into the tabletop and connected to the amplifier input (pin 1: ground, pin 2: NF+, pin 3: NF-). The microphone is connected and ready for operation. The microphone and illuminated ring are phantom-powered. With the silent slide switch the microphone and the illuminated ring are switched on or off. Maintenance For cleaning the SHM 20x/21x gooseneck microphone use a soft damp cloth. If necessary you can use a mild cleansing agent (such as washing-up liquid). Do not use any solvent agents and make sure that no water enters the transducer element. Service In the unlikely event of equipment failure, the microphone should be returned to your beyerdynamic dealer. Dismantling the microphone yourself will render the guarantee null and void. Versions Model Description...........................Order # SHM 201 A XLR plug, 100 mm....................... 473.510 SHM 201 AS XLR plug, On/Off-switch, 100 mm........... 473.529 SHM 203 A XLR plug, 300 mm....................... 464.422 SHM 203 AS XLR plug, On/Off-switch, 300 mm........... 464.430 SHM 203 F XLR socket, 300 mm......................464.449 SHM 203 FS XLR socket, On/Off-switch, 300 mm..........464.457 SHM 203 G 5/8"-internal thread, short casing, 300 mm. . . . 464.465 SHM 204 A XLR plug, 400 mm .......................464.473 SHM 204 AS XLR plug, On/Off-switch, 400 mm ...........464.481 SHM 204 F XLR socket, 400 mm......................464.503 SHM 204 G 5/8"-internal thread, short casing, 400 mm. . . . 464.511 SHM 205 A XLR plug, 500 mm....................... 464.538 SHM 205 AS XLR plug, On/Off-switch, 500 mm........... 464.546 SHM 205 F XLR socket, 500 mm......................464.562 SHM 205 G 5/8"-internal thread, short casing, 500 mm. . . . 464.570 SHM 213 A XLR plug, with illuminated ring, 300 mm .....464.589 SHM 213 F XLR socket, with illuminated ring, 300 mm. . . . 464.597 SHM 214 A XLR plug, with illuminated ring, 400 mm .....464.600 SHM 214 E XLR plug, with illuminated ring, 400 mm, without preamp.........................464.635 SHM 214 I XLR plug, with switch for microphone and illuminated ring, phantom-powered 400 mm. . 476.226 SHM 214 YN Nexus plug, with illuminated ring, 400 mm, Nextel® finish........................... 464.643 SHM 214 YLN Nexus plug, with illuminated ring, 400 mm, Nextel® finish, long shaft..................464.651 SHM 215 A XLR plug, with illuminated ring, 500 mm..... 464.678 SHM 215 AD XLR plug, with illuminated ring, 500 mm, design version ..........................464.686 SHM 215 ADN XLR plug, with illuminated ring, 500 mm, design version, Nextel® finish............... 464.694 SHM 215 E XLR plug, with illuminated ring, 500 mm, without pre-amp.................464.708 SHM 215 F XLR socket, with illuminated ring, 500 mm. . . . 464.716 SHM 215 I XLR plug, with switch for microphone and illuminated ring, phantom-powered 500 mm. . 476.234 SHM 215 YN Nexus plug, with illuminated ring, 500 mm, Nextel® finish ...........................464.724 SHM 215 YLN Nexus plug, with illuminated ring, 500 mm, Nextel® finish, long shaft..................464.732 Supplied Accessories WS 20 SW Windscreen for SHM 201 - 215, black........ 439.975 or WS 20 WS Windscreen for SHM 201 - 215, white........ 439.983 9 Optional Accessories Model Description...........................Order # ZSH 23 FT Base plate with 3-pin XLR-socket and cable . . . 464.902 ZSH 25 FT Base plate with 5-pin XLR-socket and cable . . . 464.910 ZSH 23 FG 5/8" adapter (with 3/8" reducer) with 3-pin XLR-socket and cable ............464.929 ZSH 25 FG 5/8" adapter (with 3/8" reducer) with 5-pin XLR-socket and cable............ 464.937 ZSH 30 Base plate, 3/8", chrome, 74 mm 0..........111.430 ZSH 30.01 Base plate 3/8", black, 74 mm 0............ 274.933 ZSH 40 (CM) Base plate for footfall sound insulation with XLR-plug, for goosenecks with XLR-socket .........................426.849 ZSH 40 (CM) WS Base plate for footfall sound insulation with XLR-plug, w...