Login:
Votes - 5, Average rating: 4.4 ( )

User manual AKG Acoustics, model D660S

Manafacture: AKG Acoustics
File size: 663.36 kb
File name: 25fdf079-2686-0b74-e179-e025561964e7.pdf
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


Its hypercardioid pattern is uniform with frequency, and response has been boosted at mid and high frequencies for crisp instrumental pickup and improved speech intelligibility. The microphone has a heavy duty steel screen with an integral support frame. The inner pop filter can be removed for cleaning or for replacement. The microphone incorporates a Doubleflex™ mounting system used to isolate the capsule assembly. This system places the primary resonance of the moving system to well below the audible range, resulting in excellent isolation of handling and cable induced noises. The light-weight body is die cast zinc alloy and has a dark matte finish for minimum reflection and glare. Specifications Transducer type: Dynamic pressure gradient Frequency response: 70 - 20 kHz (20 - 20 kHz @ 2 cm) Polar pattern: Hypercardioid Impedance: .500 ohms Recommended load impedance: .1,200 ohms Output connector: 3-pin male XLR-M Sensitivity: 2.0 mV/Pa; -54 dBV (re 1 V/Pa) Sound pressure level for 1% (3%) THD: 140 dB SPL (150 dB SPL) Finish: Matte black enamel Size: Maximum diameter: 2 in. (50 mm) 6.6 in.length (166 mm) Net weight: 8.5 oz. (240 g) Shipping weight: 15 oz. (420 g) Accessories included: SA 44 Stand adapter Optional accessories: SA 41/1 Stand adapter ST 45, ST 305 Table stands H 30 Universal shock mount Features • Response tailored for instrumental and vocal on-stage performance • Frequency independent hypercardioid pattern for added immunity to feedback • Very low handling noise through use of AKG’s Doubleflex™ anti- vibration isolation system • High sensitivity (2.0 mV/Pa) resulting from use of high-energy neodymium-iron-boron magnet • Light-weight die cast metal body with dark matte finish • Replaceable inner pop filter Architects and Engineers Specifications The microphone shall be a dynamic type with a cardioid be no greater than 7.13 in. (181 mm). Microphone net weight pickup pattern. Sensitivity shall be no less than 2.0 mV/Pa, and shall be no greater than 240 grams. The microphone shall have the maximum operating level for 3% THD shall be no less than an integral wind screen and replaceable inner pop filter (and 150 dB SPL. The maximum diameter of the microphone shall be noise-free on/off switch). The microphone shall be the AKG no greater than 2.0 in. (50 mm), and the microphone length shall Acoustics Model D 660 S. AKG is constantly improving and modifying therefore, specifications are subject to change Graphical Data 2.0 in. (50 mm) diameter 6.6 in. (166 mm) length or consequential damages. However, the limitation of any right or remedy shall not be effective Limited Warranty where such is prohibited or restricted by law. Simply take or ship your AKG product prepaid to our Valid only in the United States. AKG Acoustics warrants AKG products against defects in material service department. Be sure to include your sales slip as proof of purchase date. (We will not repair or workmanship for a period of two years from the date of original pur...


Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category