If you have any questions or problems, do not hesitate to contact our Technical Hotline at: (310) 782-2900. • DESCRIPTION This Edelbrock aluminum water pump is a reverse rotation heavy duty water pump for both street and racing applications. It is externally the same as original equipment pumps designed for the applications listed below, but MUST BE USED WITH REVERSE ROTATION SERPENTINE BELT PULLEYS. This pump is ideal for street rods with aftermarket serpentine belt pulleys. It offers weight

Polished Aluminum Water Pump #8892 fits the same applications as #8882. • ACCESSORIES Use #8830 Spacer Kit for short style pumps to clear competition camshaft gear drives and belt drives. Kit includes 1/2" thick water pump and crank pulley spacers. • INSTALLATION Installation is the same as for original equipment water pumps, except that aftermarket reverse rotation serpentine belt pulleys MUST be used. Consult service manual for specific procedures, if necessary. CAUTION: Be sure that fan b

Consult your service manual for any other specific procedures. Caution: Be sure that the fan bolts don't protrude through the hub so far they hit the water pump housing. • SPECIAL NOTES : — Check closely for any interference with drive belts or pulleys. — If the engine is not using a water thermostat, a water flow restrictor plate should be used in place of the thermostat. The hole size needed in the restrictor plate may vary in size from 11/16" to 1" diameter depending on your water system.

If you have any questions or problems, do not hesitate to contact our Technical Hotline at: (800) 416-8628. • DESCRIPTION : The Edelbrock aluminum water pump is a heavy duty water pump for both street and racing applications. The pump is externally the same as the original equipment service pump (Ford #D4TZ-8501-H) to provide compatibility with all accessories and pulleys. It offers weight savings along with increased cooling potential. As with all Ford FE engines the water pump is designed to

If you have any questions or problems, do not hesitate to contact our Technical Hotline at: 1-800-416-8628. • DESCRIPTION The Edelbrock aluminum water pump is a heavy duty water pump for both street and racing applications. The pump is externally the same as original equipment pumps to provide compatibility with all accessories and pulleys. It offers weight savings along with increased durability and cooling potential. An additional feature is the threaded tab for a cam stop that can be used t

If you have any questions, please call our Technical Hotline at: 1-800-416-8628, 7:00 am - 5:00 pm, Pacific Standard Time, Monday through Friday or e-mail us at edelbrock@edelbrock.com. IMPORTANT NOTE: Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage. • DESCRIPTION: The Edelbrock aluminum water pump is a heavy duty water pump for both street and racing applications. The pump i

NOTE: Removal of backing plate is not recommended,as there are no user serviceable parts in the water pump.If backing plate is removed,use no sealer on the O-ring during re-installation,and use conventional gasket sealer (not RTV silicone) on gasketed models. • SPECIFICATIONS Dimension from block surface to hub: #8850, #88502 & #8860 - 5-3/4" #8851, #88512 & #8861 - 7-5/16" #8852 & #8862 - 5-3/4" #8853 & #8863 - 7-5/16" #8854, #8864 & #88544 - 5-3/4" #8858 & #88584 - 5-1/2” WARNING Incorrect ali

NOTE: Removal of backing plate is not recommended,as there are no user serviceable parts in the water pump.If backing plate is removed,use no sealer on the O-ring during re-installation,and use conventional gasket sealer (not RTV silicone) on gasketed models. • SPECIFICATIONS Dimension from block surface to hub: #8850, #88502 & #8860 - 5-3/4" #8851, #88512 & #8861 - 7-5/16" #8852 & #8862 - 5-3/4" #8853 & #8863 - 7-5/16" #8854, #8864 & #88544 - 5-3/4" #8858 & #88584 - 5-1/2” WARNING Incorrect ali

Consult service manual for specific procedures, if necessary. CAUTION: Be sure that fan bolts don't protrude through the hub so far that they hit the water pump housing. NOTE: Removal of backing plate is not recommended,as there are no user serviceable parts in the water pump.If backing plate is removed,use no sealer on the O-ring during re-installation,and use conventional gasket sealer (not RTV silicone) on gasketed models. • SPECIFICATIONS Dimension from block surface to hub: #8850, #88502 &

If you do not feel comfortable performing this installation, it is recommended to have the installation completed by a qualified mechanic. If you have any questions, please call our Technical Hotline at: 1-800-416-8628, 7:00 am - 5:00 pm, Pacific Standard Time, Monday through Friday or e-mail us at edelbrock@edelbrock.com. IMPORTANT NOTE: Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehi