The compressor must not be installed closer than 15 inches to a wall, or 24 inches to another compressor. This allows ample circulation of air across the compressor cylinders, heads and cooler (if so equipped). If at all possible, the pulley drive system (i.e. motor pulley, compressor pulley, belts and guard) should be located next to a wall to minimize any danger created by the drive system while the compressor is operating. Due to standard motor limitations, it is recommended that the compress

Take care to prevent dust from entering the crankcase Instruction Manual Oil-Less Compressors 3. INTERMEDIATE AND FINAL SEPARATOR 3.1. FUNCTIONAL DESCRIPTION OF INTERMEDIATE SEPARATOR (2-STAGE MODELS ONLY) The intermediate separator (Fig. 9) is mounted after the two first stages of the 2-stage oil-less compressor. The separator is designed to remove excess water which results from the cooling down after the compressing process and thus to provide the next stage with a cleaned medium. Separation

OL 512 SINGLE STAGE 5 H.P. OL 524 TWO STAGE 5 H.P. OL 812 SINGLE STAGE 7 1/2 H.P. OL 812 SINGLE STAGE 10 H.P. CAUTION Before installing this compressor, read and understand the safety precautions contained within this manual CURTIS - TOLEDO, INC. 1905 Kienlen Avenue, St. Louis, Missouri 63133, PHONE(314)383-1300 ----- FAX (314)381-1439 Instruction Manual Oil-Less Compressors TABLE OF CONTENTS Safety..................................................................................................