Votes - 4, Average rating: 5
(
)
)
|
manual abstract
Any use for medical purposes, food processing as well as filling of oxygen cylinders for breathing equipment is not permitted. Explosive, combustible gases or gases detrimental to health may not be compressed. Operation in hazardous locations is not permitted. Any other use is not as specified. Use not as specified, alteration of the machine or use of parts not approved by the equipment manufacturer, can cause unforeseeable damage! Children, juveniles and persons not having been instructed in its usage are not permitted to operate this machine and any air tools connected to it. 3.2 General safety instructions When using this electric tool observe the following safety instructions, to exclude the risk of personal injury or material damage. Please also observe the special safety instructions in the respective chapters; Keep all documents, supplied with the machine, for future reference. Observe the statuary accident insurance institution regulations and regulations for the prevention of accidents pertaining to the operation of air compressors and air tools, where applicable. A General Hazard! Keep your work area tidy – a messy work area invites accidents. Be alert. Know what you are doing. Set out to work with reason. Do not operate electric tool while under the influence of drugs, alcohol or medication. Consider environmental conditions. Keep work area well lighted. Prevent adverse body positions. Ensure firm footing and keep your balance at all times. Make sure the electric tool stands safely and can not topple over (check air pressure of tyres). Do not operate electric tool near inflammable liquids or gases. Keep bystanders, particularly children, out of the work area. Do not permit other persons to touch the tool or power cable while the electric tool is running. Do not overload electric tool – use it only within the performance range it was designed for (see Technical Specifications). B Danger! Risk of electric shock! Do not expose electric tool to rain. Do not operate electric tool in damp or wet environment. Prevent body contact with earthed objects such as radiators, pipes, cooking stoves or refrigerators when operating this electric tool. Do not use the power cable for any purpose it is not intended for. A Risk of personal injury by escaping compressed air and parts hurled about by escaping air! Never direct compressed air against persons or animals! Ensure all air tools and accessories used are designed for the working pressure or are supplied via a pressure regulator. Please note that, when disconnecting the quick coupler, the compressed air contained in the pressure hose will escape all of a sudden. You should therefore firmly hold the air hose when disconnecting it. Ensure all screwed connections are fully tightened at all times. Do not attempt to repair the machine yourself! Only trained specialists are permitted to service or repair compressors, pressure vessels and air tools. A A Hazard generated by lubricated compressed air! Use lubricated compressed air only for air tools requiring such supply. Do not use an air hose, used to supply lubricated compressed air, to supply air tools not designed for operation on lubricated compressed air. Do not fill tires with lubricated compressed air. A Risk of burns from the surfaces of parts carrying compressed air! Let tool cool off before servicing. A A Risk of personal injury and crushing by moving parts! Do not operate the electric tool without installed guards. Please note that the compressor will start automatically when the pressure falls off to minimum! – disconnect from power supply prior to any servicing. Ensure that when switching on (e.g. after servicing) no tools or loose parts are in the electric tool. When coiling the air hose up or uncoiling it, do not reach between the crank and the transport handle. A Hazard generated by insufficient personal protection gear! Wear hearing protection. Wear safety glasses. Wear mask respirator when work generates dust or mist detrimental to health. Wear suitable work clothes. When working outdoors wearing of non-slip shoes is recommended. A A Hazard generated by electric tool defects! Keep electric tool and accessories in good repair. Observe the maintenance instructions. Check electric tool for possible damage before any use: Before operating the electric tool all safety devices, protection devices or slightly damaged parts must be inspected for proper functioning as specified. Check to see that all moving parts work properly and do not jam. All parts must be correctly installed and meet all conditions necessary for the proper operation of the electric tool. 12 ENGLISH Damaged protection devices or parts must be repaired or replaced by a qualified specialist. Have damaged switches replaced by a service centre. Do not operate electric tool if the switch can not be turned ON or OFF. Keep handles free of oil and grease. 3.3 Safety devices Safety valve The spring-loaded safety valve (18) is incorporated into th...