Votes - 4, Average rating: 3.8 ( )

Manafacture: ITT File size: 460.62 kb File name: GouldIOM.pdf Language of manual:

Engineered for life Table of Contents Owner’s Information SUBJECT PAGE Safety Instructions ...................................................................... 3 Important Instructions................................................................ 3 Installation .................................................................................. 3 Alignment ................................................................................... 4 Suction Piping............................................................................. 4 Discharge Piping......................................................................... 4 Rotation...................................................................................... 4 Operation.................................................................................... 4 Maintenance............................................................................... 5 Disassembly ................................................................................ 5 Reassembly.................................................................................. 5 Troubleshooting Guide............................................................... 6 Components............................................................................... 7 SSH S-Group – Engineering Data ............................................. 9 SSH S-Group Close-Coupled – Dimensions & Weights........ 0 SSH S-Group Frame-Mounted – Dimensions & Weights...... SSH M-Group – Engineering Data ......................................... SSH M-Group Close Coupled – Dimensions & Weights ...... 3 SSH M-Group Frame-Mounted – Dimensions & Weights.... 4 Goulds Pumps Limited Warranty ............................................ 5 Declaration of Conformity ......................................................35 Please fill in data from your pump nameplate. Warranty information is on page 5. Pump Model: Serial Number: Dealer: Dealer’s Phone Number: Date of Purchase: Installation Date: SAFETY INSTRUCTIONS TO AVOID SERIOUS OR FATAL PERSONAL INJURY OR MAJOR PROPERTY DAMAGE, READ AND FOLLOW ALL SAFETY INSTRUCTIONS IN MANUAL AND ON PUMP. THIS MANUAL IS INTENDED TO ASSIST IN THE INSTALLATION AND OPERATION OF THIS UNIT AND MUST BE KEPT WITH THE PUMP. This is a SAFETY ALERT SYMBOL. When you see this symbol on the pump or in the manual, look for one of the following signal words and be alert to the potential for personal injury or property damage. Warns of hazards that WILL cause serious personal injury, death or major property damage. Warns of hazards that CAN cause serious personal injury, death or major property damage. Warns of hazards that CAN cause personal injury or property damage. DANGERWARNINGCAUTION 3. Motors must be wired for proper voltage (check nameplate). Wire size must limit maximum voltage drop to 0% of nameplate voltage at motor terminals, or motor life and pump performance will be lowered. 4. Single-Phase: Thermal protection for single-phase units is sometimes built-in (Check nameplate). If no built-in protection is provided, use a contactor with proper overload. Fusing is permissible if properly fused. 5. Three-Phase: Provide three-leg protection with proper size magnetic starter and thermal overloads. 6. Maximum Liquid Temperatures: .F ( 00.C) with standard seal. 50.F ( 0.C) with optional high-temperature seal. 7. Maximum allowable operating pressure: 30 PSI ( 5 bars). 8. Maximum number of starts per hour: 0, evenly distributed. 9. Regular Inspection and Maintenance will increase service life. Base schedule on operating time. 2. Installation 1. Close-coupled units may be installed inclined or vertical. DO NOT INSTALL WITH MOTOR NOTICE: INDICATES SPECIAL INSTRUCTIONS WHICH ARE VERY IMPORTANT AND MUST BE FOLLOWED. THOROUGHLY REVIEW ALL INSTRUCTIONS AND WARNINGS PRIOR TO PERFORMING ANY WORK ON THIS PUMP. MAINTAIN ALL SAFETY DECALS. UNIT NOT DESIGNED FOR USE WITH HAZARDOUS LIQUIDS OR FLAMMABLE GASES. THESE FLUIDS MAY BE PRESENT IN CONTAINMENT AREAS. NOTICE: INSPECT UNIT FOR DAMAGE AND REPORT ALL DAMAGE TO THE CARRIER OR DEALER IMMEDIATELY. 1. Important Instructions 1. Inspect unit for damage. Report damage to carrier immediately. 2. Electrical supply must be a separate branch circuit with fuses or circuit breakers, wire sizes, etc., per National and Local electrical codes. Install an all-leg disconnect switch near pump. ALWAYS DISCONNECT ELECTRICAL POWER WHEN HANDLING PUMP OR CONTROLS. WARNINGHazardous fluidscan cause fire, burns or death. WARNINGHazardous voltagecan shock, burn orcause death. CAUTION BELOW PUMP. CONDENSATION WILL BUILD UP IN MOTOR. 2. Locate pump as near liquid source as possible (below level of liquid for automatic operation). 3. Protect from freezing or floods. 4. Allow adequate space for servicing and ventilation. 5. For close-coupled pumps, the foundation must be flat and substantial to eliminate strain when tightening bolts. Use rubber mounts to minimize noise and vibration. Ti...

Download now

Please, enter two numbers from picture: