Votes - 2, Average rating: 4.5 ( )

Manafacture: Kodak File size: 384.6 kb File name: en_A61074.pdf Language of manual:

If you wish to allow an item to default or have performed a Mode to Mode copy after fully defining the Copy From Mode, there is no need to define each item. Mode Configuration Define Mode 1 Define Mode 2 Define Mode 3 Define Mode 4 Define Mode 5 Define Mode 6 Define Mode 7 Define Mode 8 Define Mode 9 Define Mode 10 Define Mode 11 Define Mode 12 Define Mode 13 Define Mode 14 Define Mode 15 Define Mode 16 Define Mode 17 Define Mode 18 Mode to Mode Copy End Session Previous Menu · Select Define Mode x, where x is the number of the mode you wish to configure. The Mode Configuration window will appear: Mode Number: 01 Mode Name: MODE01 Item #: 0.0 Mode Configuration Single Index Format Patch Reader Off 6006 IA Field Width COIN2 Port Select n/a 3111 Level Rules OCR n/a Supprs IA Display Format Bar Code Reader Off FthenR Adjoining IA Printr Controller Supprs None Batching Front Printer Off Off Length Monitor Rear Printer Off Off Skew Monitor Mode Name MODE0 NA NA Footswitch Overrides No Sav Don't Save & End Session Save & End Session Don't Save & Prev Menu Save & Prev Menu Mode configuration items may be selected from this window. A detailed description of each item is provided in this section. 3-4 A-61074 April 1997 Index format Index format defines the index format used by the application mode selected. Refer to Description 1: Index Formatsfor a description of the index formats. The default is mode dependent; the following list provides the defaults for each mode: Mode Index Format Mode 1 Single Level Mode 2 Two Level Offset Mode 3 Two Level Mode 4 Three Level Offset Mode 5 Three Level Mode 6 Two Level Mode 7 Two Level Offset Mode 8 through Three Level Mode 18 The options are: —Single Level —Two Level —Two Level Offset —Three Level —Three Level Offset. · Select Index Formatfrom the Mode Configuration window. Mode Number: 01 Mode Name: MODE01 Item #: 1.0 Mode Configuration Single Index Format Patch Reader Off 6006 IA Field Width COIN2 Port Select n/a 3111 Level Rules OCR n/a Supprs IA Display Format Bar Code Reader Off FthenR Adjoining IA Printr Controller Supprs None Batching Front Printer Off Off Length Monitor Rear Printer Off Off Skew Monitor Mode Name MODE0 NA NA Footswitch Overrides No Sav Index Format Single Level Two Level Two Level Offset Three Level Three Level Offset Previous Menu Don't Save & End Session Save & End Session Don't Save & Prev Menu Save & Prev Menu · Select the desired index format. · Press Enter. A-61074 April 1997 Description 1: Index Formats There are five Index Format options available: · Single Level Whenever a document is assigned Level 1, the image address field associated with Level 1 (Field A) is incremented. · Two Level Whenever a document is assigned Level 2, the image address field associated with Level 2 (Field B) is incremented and the field associated with Level 1 (Field A) is set to zero. Whenever a document is assigned Level 1, the image address field associated with Level 2 (Field B) is unchanged and the field associated with Level 1 (Field A) is incremented. · Two Level Offset Whenever a document is assigned Level 2, the image address field associated with Level 2 (Field B) is incremented. Whenever a document is assigned Level 1, the image address is unchanged. IA 1 IA 2 IA 3 IA 4 IA 1.0 IA 1.1 IA 1.2 IA 2.0 IA 1 IA 1 IA 1 IA 2 (Level 1)(Level 1) (Level 1) (Level 1) (Level 2) (Level 1) (Level 1) (Level 2) (Level 2) (Level 1) (Level 1) (Level 2) 3-6 A-61074 April 1997 Description 1: Index Formats (continued) · Three Level Whenever a document is assigned Level 3, the image address field associated with Level 3 (Field C) is incremented and the fields associated with Level 2 (Field B) and Level 1 (Field A) are set to zero. Whenever a document is assigned Level 2, the image address field associated with Level 3 (Field C) is unchanged, the field associated with Level 2 (Field B) is incremented, and the field associated with Level 1 (Field A) is set to zero. Whenever a document is assigned Level 1, the image address fields associated with Level 3 (Field C) and Level 2 (Field B) are unchanged, and the field associated with Level 1 (Field A) is incremented. · Three Level Offset Whenever a document is assigned Level 3, the image address field associated with Level 3 (Field C) is incremented and the field associated with Level 2 (Field B) is set to zero. Whenever a document is assigned Level 2, the image address field associated with Level 3 (Field C) is unchanged, and the field associated with Level 2 (Field B) is incremented. Whenever a document is assigned Level 1, the image address is unchanged. IA 2.0.0IA 1.1.1IA 1.1.0IA 1.0.0 IA 2.0IA 1.1IA 1.1IA 1.0 (Level 2)(Level 3) (Level 1) (Level 3) (Level 2)(Level 3) (Level 1) (Level 3) A-61074 April 1997 IA Field width IA Field width defines the image address (IA) field widths. Refer to Description 2: Image Address Fieldsfor a description of proper field definitions. · Select IA Field Widthfrom the Mode Configuration window. Mode Nu...

Download now

Please, enter two numbers from picture: