Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (separate sheet). These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, this manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. A battery is supplied with the unit. The life of thi

* Use only the specified AC adaptor (PSA-Series). Panel Description 2. CHECK Indicator This indicator shows whether an effect is ON/OFF, and also doubles as the Battery Check indicator. The indicator lights when an effect is ON. * If this indicator goes dim or no longer lights while an effect is ON, the battery is near exhaustion and should be replaced immediately. For instructions on changing the battery, refer to “Changing the Battery” (p. 12). * The CHECK indicator shows whether the effect is

206) Song arrangements (S01–S05) These are arrangements whose data is rewritable, and up to 5 different arrangements for each song can be stored on memory cards. Memory Card BR-900CD Preset Arrangement Song Song Arrangement Using the Rhythm Switching the Rhythm Mode The Rhythm mode switches each time [ARRANGE/ PATTERN/OFF] is pressed. [ARRANGE/PATTERN/OFF]: Lit (Arrangement Mode) Performance and programming of arrangements is enabled. Press [PLAY] to start the performance of the arrangement. * Y

To prevent that, replace the battery. AC ADAPTOR (OPTION) BOSS ACA 120 ► Be sure to keep the battery securely connected even while using the AC Adaptor, then the CE-3 will continued to operate even if the AC Adaptor cord comes out during performance. * Unplug the cord from the INPUT jack when the CE-3 is not in use to avoid wasting the battery. BOSS ACA 240 BOSS ACA 220 FOR 240V AC FOR 220V AC Power................Battery 9 V ( 1), AC Adaptor (BOSS ACA series) Power Consumption......13mA

The Loop Phrase screen will appear. 2. Move the cursor to the EDIT icon and press [ENTER/ YES]. Alternatively, you can press [F2] (EDIT) if the EDIT icon is currently displayed. The Loop Phrase Edit screen will appear. 3. Move the cursor to the Loop Phrase number and select the phrase to be edited using the TIME/VALUE dial. 4. Move the cursor to “MEAS” (length in measures) or “BEAT,” and modify the setting using the TIME/ VALUE dial. 5. Move the cursor to the start or end position for playback o

When set to “OFF,” the song is played at the tempo selected at the time. 3. Release [SHIFT]. * You can check the initial tempo settings in Song Play mode. Hold down [SHIFT] and press [VOICE] (INIT TEMPO). The initial tempo settings are displayed while [SHIFT] is held down. Chapter 4 Recording and Editing Songs (Song Edit Mode) <3A> Do Realtime Recording Here, select the pattern and then record it as it is being performed. * When recording over a song that has already been recorded, the newly rec

Individual +---------------+ +-----------------------------+ *Refer to "Table WAH" 04 00 00 00 +---------------+ +-----------------------------+ | Quick Fx | | ROM Area (Data) | ... Read Only, Individual | | +-----------------------------+ *Refer to "Table Quick Fx Data" 05 00 00 00 | | +-----------------------------+ | | | ROM Area (Name) | ... Read Only, Individual +---------------+ +-----------------------------+ *Refer to "Table Quick Fx Name" 06 00 00 00 +---------------+ +-----------------

Wiring diagrams for these connectors are shown below. Make connections after first checking the wiring diagrams of other equipment you intend to connect. 23 Chapter 1 Outputting Sounds Turning on the Power Chapter 1 Outputting Sounds Turning on the Power Before turning on the power, confirm the following. • Are all external devices properly connected? • Is the volume on the GT-10B, your amp, and all other connected devices turned down to the minimum level? Once the connections have been complete

[WRITE] WRITE button [UTILITY] UTILITY button • Reference such as (p. **) indicate pages in this manual to which you can refer. * All product names mentioned in this document are trademarks or registered trademarks of their respective owners. Owner’s Manual Thank you, and congratulations on your choice of the BOSS GT-6 Guitar Effects Processor. Before using this unit, carefully read the sections entitled: • USING THE UNIT SAFELY (page 2–3) • IMPORTANT NOTES (page 4) These sections provide import

Press PARAMETER [ ] a number of times until the User Phrase settings screen is displayed. 5. Press PARAMETER [ ] [ ] to move the cursor, then rotate the PATCH/VALUE dial to set the User phrase. Step Pitch Length Sound Attack * When you want to place the currently set step at the very end, turn the PATCH/VALUE dial clockwise in the settings screen for the step that follows it (it does not matter which parameter is selected), until “---” appears in the bottom row of the screen. STEP Sets the step