Votes - 4, Average rating: 3.8
(
)
)
|
manual abstract
Thank you for purchasing Acesonic’s AM-170 250Watt (@ 4 Ohms) Professional Mixing Amplifier. Acesonic takes pride in providing its customers with only the most advanced and highest quality products on the market. With proper care and use you will get many years of satisfying use from your Acesonic product. Be sure to keep original packaging in case re-shipping is required for returns or repairs. First Things First Before using your AM-170, take a few simple steps: • Check to see that your local power outlets supply the correct voltage for the AC input. • Do not open the device as there are no user- serviceable parts inside. For repairs, contact the local distributor, an authorized service center or Acesonic’s U.S. headquarters. • Care and cleaning directions are included in this User Manual, but preventive measures are good common sense. Do not use the device in areas that are wet or prone to dampness. Always allow sufficient room around the device to provide sufficient air flow for cooling. • When the device will not be used for a long period of time, disconnect the power plug from the wall, as well as the back of the unit, and remove all connecting cables for proper storage. Table of Contents First Things First .................................................1 System Components............................................2 Product Features..................................................2 Initial Setup Considerations................................2 Front Panel Operations .......................................2 Back Panel Operations ........................................3 Remote Control Operations................................4 Care & Maintenance...........................................4 Troubleshooting ..................................................5 Connecting the AM-170.....................................6 FCC Advisory, Safety Warnings & Safe Use.......7 Company Contact Information...........................8 1 System Components Front Panel Operations Your Acesonic AM-170 unit is designed for years of enjoyment. Please take a moment to review the following instructions for its proper use and care. Included Accessories Your AM-170 includes the following items: • 1 AM-170 Mixing Amplifier • 1 Remote control • 1 AC power adapter cord • User’s Manual, Warranty Card If you are is missing any of these items, contact your Acesonic dealer at once. Product Features The AM-170 allows you to connect mixer, player or other audio devices directly to its stereo RCA audio inputs for instant sound. You also have great flexibility in output choices. • 80+80W @ 8 Ohms maximum output • 125+125W @ 4 Ohms equivalent output • Four A/V inputs selector • Microphone volume control • Microphone bass, middle and treble control • Microphone echo repeat and delay control • Music bass, middle and music treble control • Music balance control • Five 1/4" microphone inputs: 3 front, 2 rear • Music effect bypass switch • Dynamic sound enhancer - Enhance a full range of frequencies for both music and vocals • Fully digital, color LCD display • Record line output and subwoofer output • One pair banana speaker outputs Initial Setup Considerations This basic setup guide provides simple, step-by-step instructions for setting up your AM-170 system, along with a complete diagram of the back panel connections and switches. Audio systems vary, so you may need additional and/or longer cables, adaptors, etc., to connect your system in the way(s) you want. For any questions, please contact your dealer or Acesonic technical support. Refer to the Figure A at the top of page 3 (right). 1. KEY CONTROL - The line of buttons allows you to raise or lower the key by six (6) semi-tones. The center button is the original (natural) key, and flat is to the left while sharp is to the right. 2. MASTER MICROPHONE VOLUME – This dial controls the master volume for all three microphone inputs. Turning clockwise raises the volume. 3. POWER ON/OFF button - Turns the AM-170 on or off. 4. MUSIC CONTROLS - These control the volume, balance and tone (Treble, Mid and Bass) of the music output from all input sources. 5. MICROPHONE TONE - These controls adjust the Treble, Mid and Bass tone for all microphones that are in use. 6. MICROPHONE ECHO – These controls adjust the Repeat, Volume and Delay settings for Echo. 7. INDIVIDUAL MICROPHONE VOLUME – These controls adjust the Volume independently for Mic 1, Mic 2 and Mic 3. 8. MICROPHONE INPUTS – Three 1/4" input jacks for microphones. 9. MASTER MUSIC VOLUME – This control adjusts the Master Volume for music coming from any of the sources. 10. AUTO SELECT – This button enables the unit to scan and detect the signal automatically (BGM, AUX, DVD and CDG). When the signal is detected and identified, the scanning will stop and you will see the input source indicator light confirming the selection (see Item #11, below). 11. INPUT SELECTION – This button selects the input source in manual mode. You can switch input amon...