Votes - 2, Average rating: 4 ( )

Manafacture: Ampeg File size: 296.6 kb File name: PF_cabs_OM.pdf Language of manual:

Read, follow, and keep these instructions. Heed all warnings. 2. This speaker is capable of producing high sound pressure levels that may cause permanent hearing damage. User caution is advised and ear protection is recommended during use. 3. This speaker is designed for use on a sturdy, level surface. Whenever stacking speaker cabinets, do not stack more than two high. 4. Speaker cables are a tripping hazard and must be routed out of traffic areas and away from any possible accidental contact. 5. Do not expose this speaker to rain or moisture. Do not place liquid filled containers on this speaker. Clean only with a dry cloth. 6. Repair or service of this speaker should be performed only by qualified personnel. Introduction Portable. Powerful. Sexy. Ampeg designed and built the original Portaflex Series over 50 years ago. Congratulations are in order – for today, in your hands, is the new-and-improved Portaflex! Featuring a high frequency horn with 3-position switch, four removable casters and a stylish top handle and black diamond tolex, these Eminence-loaded cabinets can handle up to 400W of power! Don’t stop now! Your Portaflex cabinet is an ideal companion to the Ampeg PF-350 or Ampeg PF-500 amplifier, available separately. Like all Ampeg products, your Portaflex cabinet is designed by musicians and built using only the best of components. Each cabinet is tested to confirm that it meets our specifications, and we believe that this cabinet is the absolute best that it can be. In order to get the most out of your new cabinet, please read this manual before you begin playing. And thank you for choosing Ampeg. Here are some of the features packed into your new Ampeg Portaflex speaker cabinet: • Designed as a stack with a Portaflex amplifier (available separately) • Aligned screw holes and clasps allow secure stacking of a Portaflex amplifier • Loaded with Eminence speaker(s) for high quality sound • Equipped with a high frequency horn and a 3-position switch • Two paralleled 1/4" TS input and output jacks • Nominal impedance: 8 ohms • Power handling: 400W rms • Four removable casters • Stylish top handle and black diamond pattern tolex • Flip-top functionality allows for compact and secure transport of cabinet and Portaflex head (available separately) PF-115HE / PF-210HE Speaker Cabinet Rear Panel Connector Plate HIGH FREQUENCY ATTENUATOR FULL RANGE INPUTSOFF –6 0 IMPEDANCE: 8 OHMS POWER: 400W RMS PF-xxxHE12 1. 1/4" TS Full Range Input / Output Jacks: The jackplate features two 1/4" jacks wired in parallel, allowing easy daisy-chaining from one speaker to another. Each of the jacks may be used as an input or a through connection. Connect the speaker-level output of your amplifier to the cabinet’s input jack using a good quality (non-shielded) speaker cable (included). Never use (shielded) instrument cable to connect speakers to an amplifier. You can utilize the unused jack as an output/through jack to connect a second 8 ohm speaker cabinet in parallel. This will present a total load of 4 ohms to the amplifier. 2. High Frequency Horn Level Switch: The three-...

Download now

Please, enter two numbers from picture: