Votes - 3, Average rating: 4
(
)
)
|
Other manuals for this model:
manual abstract
Flash St e p Re c 2 Make the following settings. • Rhythm number • MODE button 3 Press the CHORD/TR1 button, which is one of the SONG MEMORY TRACK buttons, to select Track1. • When recording starts, the REC indicator flashes on the display. After a few moments the indicator stops flashing, and remains on the display. 4 Press the SYNCHRO/FILL-IN NEXT button. 5 Play a chord. • Use the chord play method that is specified by the current MODE button setting (Fingered, CASIO Chord, etc.). • When the MODE button is set to Normal, specify the chord using the root input keyboard and chord type input keyboard. See “Specifying Chords in the Normal Mode” on page E-66 for details. Ch o r d Cord name Measure, beat, and clock at current location* * 96 clocks = 1 beat 6 Input the length of the chord (how long it should be played until the next chord is played). • Use the number buttons to specify the length of the chord. See “Specifying the Length of a Note” on page E-66 for details. • The specified chord and its length are stored in memory and the keyboard stands by for input of the next chord. • Repeat steps 5 and 6 to input more chords. 7 After you are finished recording, press the START/ STOP button. • This enters playback standby for the song you have just recorded. • To play back the song at this time, press the START/ STOP button. NOTE • Use the procedure under “Correcting Mistakes While Step Recording” on page E-69 to correct input mistakes you make during step recording. • You can add on to a track that already contains recorded data by selecting that track in step 3 of the above procedure. Doing so automatically locates the step recording start point at the first beat immediately following the previously recorded data. • Inputting “0” as the chord length in steps 5 and 6 of the above procedure specifies a rest, but the rest is not reflected in the accompaniment contents when the accompaniment is played. Track 1 Contents After Step Recording In addition to chords, the following data is also recorded to Track 1 during step recording. This data is applied whenever Track 1 is played back. • Rhythm number • INTRO/ENDING 1 button, INTRO/ENDING 2 button, VARIATION/FILL-IN 1 button, VARIATION/FILL-IN 2 button, SYNCHRO/FILL-IN NEXT button operations NOTE • You can also use number buttons 1 through 7, and button 9 to specify the button release timing for the VARIATION/ FILL-IN 1, VARIATION/FILL-IN 2, and SYNCHRO/FILLIN buttons. For more information, see “Specifying the Length of a Note” on page E-66. Specifying release timing specifies that the applicable button remains depressed for a particular amount of time. If you do not specify the release timing, it is assumed that the button is pressed and then immediately released. 735A-E-067B E-65 WK3100_e_61-73.p65 65 04.3.26, 0:11 PM E-66 Specifying Chords in the Normal Mode When the MODE button is set to Normal during step recording, you can specify chords using a method that is different from CASIO Chord and Fingered fingerings. This chord specification method can be used to input 18 different chord types using only two keyboard keys, so chords can be specified even if you don’t know how to actually play them. 1 Major 2 Minor 3 Augmented 4 Diminished 5 Suspended four 6 Seventh 7 Minor seventh 8 Major seventh 9 Minor major seventh Root input keyboard Chord type input keyboard 0 Seventh flat five A Minor seventh flat five B Seventh suspended four C Diminished seventh D Minor add ninth E Add ninth F Minor sixth G Sixth H Six ninth Song Memory Function To specify a chord, hold down the key on the root input keyboard that specifies the root, and press the key in the chord type input keyboard to specify the chord type. When inputting a chord with a specified bass note, pressing two keys of the root input keyboard causes the lower note to be specified as a bass note. Example 1: To input Gm7, hold down G on the root input keyboard and press the m7 key on the chord type input keyboard. Hold down key to specify chord root. Press key to specify chord type (G) (m7) Example 2: To input Gm/C, hold down C and G on the root input keyboard and press the m key on the chord type input keyboard. Hold down key to specify on bass and chord root. Press key to specify chord type. (C) (G) (m) Specifying the Length of a Note During step recording, the number buttons are used to specify the length of each note. Note lengths Use number buttons [1] through [6] to specify whole notes ( ), half notes ( ), quarter notes ( ), eighth notes ( ), 16th notes ( ), and 32nd notes ( ). Example: To specify a quarter note ( ), press [3]. Dots ( ) and triplicates ( ) While holding down the [7] (dot) or [9] (triplicate), use buttons [1] through [6] to input the lengths of the notes. Example: To input a dotted eighth notes ( ), hold down [7] and press [4]. Ties Input the first and then the second note. Example: To input , press [4] and then [8]. Next, press [5]. This note will be tied to the next note you input (16th no...
Other models in this manual:Musical Instruments - WK-3100 (6.33 mb)
Musical Instruments - WK-3500 (6.33 mb)