Votes - 5, Average rating: 4
(
)
)
|
manual abstract
They are also used as holdback (stage monitor) mixing controls for performers. © MONITOR 1 (REV/ECHO) POST FADER & EQ controls These are the MONITOR 1 channel controls and they are used to control the signal level which is fed out from the channel fader and equalizer post-stages and sent to the reverberation circuit, and the MON OUT 1 and ECHO SEND jacks. These controls perform the following roles in accordance with the intended application. 1. Channel controls for reverberation effect. 2. Channel controls for echo effect. 3. Mixing controls for holdback (stage monitor) © PAN controls These controls are used to distribute the input signals of the channels to the left and right channels, and also to position the sound images. Q Channels faders These are used to set the mixing level of the channels and to attain an overall balance in the volume. © AUX IN controls These are used to control the AUX IN 1 and AUX IN 2 input levels. © AUX PAN controls These are used to distribute the AUX 1 and AUX 2 input signals to the left and right channels, and to position the sound images. © REVERB/ECHO control This is used to control the overall output level of the built-in reverberation unit. When an echo unit has been connected to the ECHO RETURN input jack, the built-in reverberation unit is cut off, and the overall output level of the echo device is controlled.