Votes - 2, Average rating: 3.5 ( )

Manafacture: Yamaha File size: 935.13 kb File name: Language of manual:

Other manuals for this model:

Musical Instruments - MX400-8 (935.02 kb)

Musical Instruments - MX400-8 (935.15 kb)

When the switch is not pressed in ( ), the central meter group will indicate the GROUP 3/4 signal level. When the switch is pressed in ( ), the central meter group will indicate the ST2/MONITOR L/R signal level. MX400 User’s Guide Rear panel 11 Rear panel 11 l INSERT OUT IN 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 DIRECT OUT 0dB INSERT I/O 0dBINPUT INPUT B INPUT A 1 2 3 4 1INPUT A jacks These are unbalanced XLR3-31 type jacks which input the signal for each input module. Use the A/B switch to select these jacks. • Nominal input level: –60dB Phantom power (+48 V) can be supplied to these jacks. Phantom power is turned on/off using the PHANTOM switch. When the PHANTOM switch is on, make sure that those devices which do not require phantom power are connected to the INPUT B jacks (2). 2INPUT B jacks These are 1/4” phone jacks which input the signal for each input module. Use the A/B switch to select these jacks. These are balanced TRS jacks, with tip=hot, ring=cold, and sleeve=ground. • Nominal input level: –60dB 3INPUT INSERT I/O jacks (0dB) These are 1/4” phone jacks patched in front of the input module faders. These are unbalanced TRS jacks, with tip=out, ring=in, and sleeve=ground. • Nominal input level: 0dB • Nominal output level: 0dB 4DIRECT OUT jacks (0dB) These are unbalanced 1/4” phone jacks which output the post-fader signal independently from each input module. • Nominal output level: 0dB MX400 User’s Guide 12 Rear panel 12 Rear panel 5 AUX SEND +4dB GROUP SUB IN +4dB ST INPUT 2 ST INPUT 1 5 4 3 2 1 2 1 C L/ MONO L/ MONO GROUP INSERT I/O 0dB 4 3 2 1 ST INSERT I/O 4 3 R A R 0A D L 2TR IN ST SUB IN F 4 GROUP OUT +4dB 3 2 1 R 0dB L –10dBV L +4dB B R L AB R L ST2/MONI OUT +4dB ST1 OUT +4dB R R R L ST INPUT 4 ST INPUT 3 R L REC OUT TAPE IN L/ MONO L/ MONOG L L B –10dBV –10dBV H R R R R ON OFF POWER ON OFF PHANTOM+48V I J 6 8 9 7 Phantom Power Warning To prevent hazard or damage, connect only microphones and cables that conform to the IEC268-15A standard. 9-E FNTM 01 3/5 5GROUP SUB IN jacks (+4dB) These are unbalanced 1/4” phone jacks which input signals from sub-mixers or other devices. • Nominal input level: +4dB 62TR IN jacks (–10dBV) These are RCA pin jacks used to input a stereo sound source. • Nominal input level: –10dBV 7ST SUB IN jacks (+4dB) These are 1/4” unbalanced phone jacks which input a stereo signal from a sub-mixer or other source. • Nominal input level: +4dB 8REC OUT jacks (–10dBV) These are RCA pin jacks which output a stereo signal to a DAT or cassette recorder. These jacks are positioned before the stereo master fader. • Nominal output level: –10dBV 9TAPE IN jacks (–10dBV) These are RCA pin jacks which input a stereo source such as a DAT, stereo cassette deck, or CD player. • Nominal input level: –10dBV 0ST INPUT 1/2 A jacks These are unbalanced 1/4” phone jacks which input a stereo source. These jacks are selected by the A/B switch. • Nominal input level: +4dB or –10dB AST INPUT 1/2 B jacks These are RCA pin jacks which input a stereo source. These jacks are selected by the A/B switch. • Nominal input level: +4dB or –10dB MX400 User’s Guide Rear panel 13 MX400 User’s Guide BST INPUT 3/4 jacks These are unbalanced 1/4” phone jacks which input a stereo source. • Nominal input level: +4dB or –10dB CAUX SEND jacks (+4dB) These are unbalanced 1/4” phone jacks which output the signals of the AUX SEND buses. • Nominal output level: +4dB DGROUP INSERT I/O jacks (0dB) These are 1/4” phone jacks patched in front of the GROUP faders. These TRS jacks are unbalanced. • Nominal output level: 0dB • Nominal input level: 0dB Tip=out, Ring=in, Sleeve=ground EST INSERT I/O jacks (0dB) These are 1/4” phone jacks patched in front of the L-ST1-R fader of the master module. These TRS jacks are unbalanced, with Tip=out, Ring=in, and Sleeve=ground. • Nominal output level: 0dB • Nominal input level: 0dB FGROUP OUT jacks (+4dB) These are unbalanced 1/4” jacks which output the signals of the GROUP buses. • Nominal output level: +4dB GST2/MONI OUT jacks (+4dB) These are unbalanced 1/4” jacks which output the signal of the STEREO L,R bus or the signal of the MONITOR bus. • Nominal output level: +4dB HST1 OUT jacks (+4dB) These are balanced XLR3-32 type jacks which output the signal of the stereo L,R bus. • Nominal output level: +4dB IPOWER switch This switch turns the power on/off. When in the “ON” position, the POWER indicator will light. JPHANTOM power switch This switch turns the internal phantom power supply on/off. When in the “ON” position, the PHANTOM indicator will light, and 48 DC power will be provided between pin 2 and pin 3 of the INPUT A jacks. If you do not need phantom power, be sure to turn this to the “OFF” position. ...... .... ............ 14 Appendix 14 Appendix x General specifications. Frequency response 20 Hz~20 kHz +1, –2dB (ST L/R, GROUP @ 600 . AUX SEND @ 600 .) Total harmonic distortion Less than 0.1% (20 Hz~20 kHz @ 14dB*) (ST L/R, GROUP @ 600 . AUX SEND @ 600 .)...

Download now

Please, enter two numbers from picture: