Votes - 4, Average rating: 4.5 ( )

Manafacture: Yamaha File size: 2.05 mb File name: Language of manual:

Other manuals for this model:

Musical Instruments - MG166CX-USB (3.43 mb)

Musical Instruments - MG166CX-USB (2.48 mb)

Musical Instruments - MG166CX-USB (3.41 mb)

Click [Switch]. Quick Guide Mixer Basics Step Recording with Cubase AI 4 5 This section describes the procedure for recording to the Cubase AI 4 software we installed earlier via the MG mixer. For details on operation of the Cubase AI 4 software refer to the pdf-format manual provided with the software. NOTE NOTE Macintosh: Select [VST Audio System] in the [Device] field on the left side of the window. Select [USB Audio CODEC (2)] in the [ASIO Driver] field on the right side of the win- dow, and click [OK]. Skip ahead to step 6, below. Under Mac OS X you can select either [USB NOTE Audio CODEC (1)] or [USB Audio CODEC (2)] in the [ASIO Driver] field. Normally you should select [USB Audio CODEC (2)], but if you will only be playing back and mixing previously recorded data you can select [USB Audio CODEC (1)] to lighten the load on the computer’s CPU. 4 On a Windows computer select [ASIO DirectX Full Duplex Driver] in the [Devices] field on the left side of the Device Setup window, and click [Control Panel] on the right side of the window. 10 MG206C-USB/MG166CX-USB/MG166C-USB Owner’s Manual 7 Select [New Project] from the [File] menu to create a new project file. The new project dialog window will open. For this example select [CAI4 - 4 Stereo 8 Mono Audio Track Recorder] and click [OK]. Recorded Cubase AI 4 data is stored as a “project file”. 8 When the directory selection dialog win- dow appears, select the folder to which the project and audio files for the project are to be stored, and click [OK]. An empty project window with 4 stereo and 8 monaural tracks will appear. Project window Transport panel Mixer window Mixer Basics Quick Guide 7 Select [New Project] from the [File] menu to create a new project file. The new project dialog window will open. For this example select [CAI4 - 4 Stereo 8 Mono Audio Track Recorder] and click [OK]. Recorded Cubase AI 4 data is stored as a “project file”. 8 When the directory selection dialog win- dow appears, select the folder to which the project and audio files for the project are to be stored, and click [OK]. An empty project window with 4 stereo and 8 monaural tracks will appear. Project window Transport panel Mixer window Mixer Basics Quick Guide 5 The ASIO Direct Sound Full Duplex Setup dialog window will be displayed. Check only the input port and output port [USB Audio CODEC] checkbox. 6 Make sure that “USB Audio CODEC 1/2” are shown in the [Port System Name] field, and check the [Visible] column in the Device Setup window. Click [OK] to close the window. If the [Port System Name] field does not NOTE change, close and restart the Cubase AI 4, then open the Device Setup window. NOTE MG206C-USB/MG166CX-USB/MG166C-USB Owner’s Manual 11 Preparing to Record 1 Click in the track list (the area in which the track names are displayed) to select a track to record on. The various settings for the selected track are available in the Inspector on the left side of the display. You will normally use a stereo track when recording synthesizers, and a monaural track when recording vocals or guitar. 2 Click the Input Routing field in the Inspec- tor to select the audio input source. Select “Stereo In 1” for a stereo track and “Left (Right)-Stereo In 1” for a monaural track. 3 Make sure the [Record Enable] button for the track to be recorded is turned on. If the [Record Enable] button is off, click it to turn it on. Inspector Input routing [Record Enable] button Track list Quick Guide Mixer Basics Preparing to Record 1 Click in the track list (the area in which the track names are displayed) to select a track to record on. The various settings for the selected track are available in the Inspector on the left side of the display. You will normally use a stereo track when recording synthesizers, and a monaural track when recording vocals or guitar. 2 Click the Input Routing field in the Inspec- tor to select the audio input source. Select “Stereo In 1” for a stereo track and “Left (Right)-Stereo In 1” for a monaural track. 3 Make sure the [Record Enable] button for the track to be recorded is turned on. If the [Record Enable] button is off, click it to turn it on. Inspector Input routing [Record Enable] button Track list Quick Guide Mixer Basics NOTE 4 Play the instrument to be recorded, and adjust the MG mixer’s GAIN controls, channel faders and STEREO OUT Master fader so that the Clipping indicator never light. Clipping indicator 5 Specify the point at which you want to start recording via the ruler at the top of the project window. Click the black area of the ruler to move the project cursor (the vertical black line) to that position. Ruler Recording and Playback 1 Click the Transport panel [Record] button to begin recording. When recording is started the project cursor will begin moving to the right and a box that displays the recording results will be created. Rewind Forward 2 Play the part. 3 When you finish recording the track, click the Tr...

Download now

Please, enter two numbers from picture: