Login:
Votes - 3, Average rating: 4 ( )

User manual Yamaha, model DSP5D

Manafacture: Yamaha
File size: 21.93 mb
File name:
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


ST IN jacks 1–4 are used mainly to connect stereo line-level devices. Input signal sensitivity, pad on/off, and phantom power (+48V) on/off are controlled from the top panel AD IN section (. p.44). PM5D-RH model INPUT jacks 1–48 and ST IN jacks 1–4 can both be used to connect microphones or line-level devices. Input signal sensitivity and phantom power (+48V) on/off are controlled from within the display (. p.44). However, all phantom power can be switched on/off as a whole by the rear panel [+48V MASTER] switch. DSP5D INPUT jacks 1–48 and ST IN jacks 1–4 will accommodate connections ranging from microphones to line level devices. Each connector is provided with phantom power (+48V), and the input signal sensitivity and phantom power on/off can be operated from the display as on the PM5D-RH (. p.44). The +48V master switch is turned on/off in the SYS/W.CLOCK function MIXER SETUP screen (. p.221). Analog audio connections Synthesizer Microphone Effect processor Synthesizer Microphone Microphone When the PM5D, PM5D-RH, or DSP5D are in the default state, the input signal from INPUT jacks 1–48 is patched to input channels 1–48, and the input signal from ST IN jacks 1–4 is patched to the ST IN channels. However, you may change this if desired (for details on restoring the default patching . p.40). Microphone Synthesizer 4 Connections and setup 34 PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Operating section PM5D/PM5D-RH MIX OUT jacks 1–24, MATRIX OUT jacks 1–8, and STEREO OUT A/B jacks respectively output the signal from MIX channels 1–24, MATRIX channels 1–8, and the STEREO A/B channels. The MONITOR OUT jacks output the monitor signal that is selected in the top panel MONITOR section. The CUE OUT jacks output the cue monitor signal of the channel that is currently selected by its [CUE] key. Analog output connections LA C R L R L R L R L 8 7 6 5 4 3 2 1 MIX OUT MATRIX OUT MONITOR OUT CUE OUT DC POWER INPUT STEREO OUT Monitor speakers Monitor speakers PW800W power supply Monitor speakers (foldback) Main speakers Recorder, relay vehicle, etc. PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Operating section 35 4 Connections and setup DSP5D With the default settings, the signals of MIX channels 1–22 are output from OMNI OUT jacks 1–22, and the signals of the STEREO A channel are output from OMNI OUT jacks 23–24. The desired output signal can be patched to each jack; the signals of MIX channels 1–24, MATRIX channels 1–8, STEREO A/B channels, or cue signals can be output from OMNI OUT jacks 1–24. CASCADE IN OUT OUT OUT TX RX TX RX IN IN 75. IN TERMINATED Main speakers Monitor speakers (foldback) PW800W power supply (for backup external power supply) 4 Connections and setup 4 Connections and setup R L R L SMPTE USB OUT IN 75 ON OFF 2 1 COAXIAL COAXIAL AES/EBU AES/EBU AES/EBU 3 2 1 3 THRU OUT IN DAT 00.00.00.00 2TR IN ANALOG 2TR OUT DIGITAL 2TR IN DIGITAL SLOT CD player DAT recorder Digital MTR/HDR Digital I/O card PM5D/PM5D-RH Use 2TR IN DIGITAL jacks 1–3 to connect digital sources such as CD players or DAT recorders. (To input analog output signals from a CD player or DAT recorder, use 2TR IN ANALOG jacks 1/2.) Use 2TR OUT DIGITAL jacks 1–3 to send the STEREO A/ B channel signals to a DAT recorder or other digital device. By installing separately sold mini-YGDAI I/O cards in slots 1–4 (1–2 on the DSP5D) you can add analog input/output jacks to the PM5D/DSP5D or allow connection of digital devices such as digital MTR or HDR units. The following types of I/O card can be used. Card type Model Number of channels Digital format Bit depth AD card MY4-AD 4 — 24 bit MY8-AD* 8MY8-AD24 MY8-AD96 DA card MY4-DA 4 — 20 bit MY8-DA96 8 24 bit AD/DA card MY8-ADDA96 8 — 24 bit Digital I/O card MY8-AE 8 AES/EBU 24 bit MY8-AEB MY8-AE96 MY8-AE96S MY16-AE 16 MY8-AT 8 ADAT MY16-AT 16 MY8-TD 8 TASCAM MY16-TD 16 CobraNet card MY16-C* 16 CobraNet 24 bit MY16-CII AVIOM Yamaha output card AVIOM16/o-Y1 16 A-NET 24 bit AudioService MADI card MY16MADI64 16 MADI 24 bit Card type Model Number of channels Digital format Bit depth AuviTran EtherSound card AVY16-ES 16 EtherSound 24 bit Waves plug-in DSP card Y96K* 8 ADAT 24bit * is supported only by the PM5D. For the most recent information regarding I/O cards, refer to the following Yamaha website. Note • In order to send or receive digital audio via the 2TR IN DIGITAL jacks, 2TR OUT DIGITAL jacks, or slots 1–4, the word clock data of the respective signals must be synchronized (.p.38). • In order to assign input signals from the 2TR IN DIGITAL jacks, 2TR IN ANALOG jacks, or slots 1–4 to input channels or ST IN channels, you will need to change the input patching (.p.74). PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Operating section PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Operating section 37 4 Connections and setup Before installing a card, you must check the Yamaha website to make sure that this device is compatible with this card, and to verify the number of cards that can be installed ...


Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category