Votes - 2, Average rating: 4
(
)
)
|
Other manuals for this model:
Musical Instruments - DM2000VCM (4.08 mb)
Musical Instruments - DM2000VCM (4.73 mb)
manual abstract
Changes and additions in Version 2.20 . More Add-On Effects Packages available (pages 176 and 179) The following Add-On Effects Packages are now available: • AE041 Surround Post Package • AE051 Vintage Stomp Package Due to this addition, effect memories #53 through 67 in the Effects library are now designated as preset effects programs. These preset programs are dedicated to Add-On Effects. The numbers of effects programs that do not have Add-On Effects installed are grayed out and cannot be used. The following effects programs in the Effects library have been dedicated to the new Add-On Effects Packages. No. Preset name Type 62 Room ER ROOM ER 63 Auto Doppler AUTO DOPPLER 64 Field Rotation FLD ROTATION 65 Max100 MAX100 66 Vintage Phaser VNTG PHASER 67 Dual Phaser DUAL PHASER Please refer to the following Yamaha website for the latest information on the Add-On Effects Packages: . Additional trigger sources in the GPI OUTPUT section (pages 266 and 305) The following parameters have been added as the trigger signal source in the GPI OUTPUT section. xxx ON TALLY: The trigger signal is active only while the corresponding channel is turned ON. The following parameters have been added in the OUTPUT list of the “GPI Trigger Source & Target List” on page 305. # Source 398 CH1 ON TALLY : 493 CH96 ON TALLY 494 BUS1 ON TALLY : 501 BUS8 ON TALLY 502 AUX1 ON TALLY : 513 AUX12 ON TALLY 514 MTX1 ON TALLY : 517 MTX4 ON TALLY 518 ST ON TALLY . About the DM2000 Editor version If you use the DM2000 Editor (Studio Manager) to control the DM2000, update the DM2000 Editor to version 2.1.2 or higher (Studio Manager version 2.1 or higher). If your Studio Manager CD-ROM version is not X5401B0, download the latest version from the following Yamaha website: EN Changes in V2.11 Changes in V2.11 ported. Also, in accordance with the mLAN MIDI specifications, multiple MIDI ports on SLOT 1 have been changed to a single port. (Now you do not need to select Ports 1-8.) Please refer to the following website for the latest information on compatible cards, and on the number of cards that can be installed in combination with other cards. Changes in V2.10 . MIX C-R SOURCES parameter added to Control Room Monitor (page 159) A “MIX C-R SOURCES” parameter has been added in the CONTROL ROOM SETUP page. In V2.0, you could choose one item from 2TR D1, D2, D3, A1, or A2 as a monitor source, plus other sources (STEREO, ASSIGN1, or ASSIGN2). In V2.1, you can turn the MIX C-R SOURCES parameter off to disable this simultaneous selection. . MIX MONITOR SOURCES parameter added to Surround Monitor (page 160) A “MIX MONITOR SOURCES” parameter has been added to the SURROUND MONITOR page. In V2.0, you could choose ASSIGN1 or ASSIGN2 in addition to a BUS as the monitor source, but in V2.1 you can turn this parameter off to disable this simultaneous selection. . . Presets for the THX pm3 monitor system have been added to the bass management settings for surround monitoring. Several supplements have also been added regarding the surround monitor settings, so please replace the corresponding pages with the following. Configuring Surround Monitoring Surround monitoring, including speaker setup, monitor matrix, Bass Management, and monitor alignment, is configured on the Surround Monitor Setup page. 1 Use the MONITOR [DISPLAY] button to locate the Surround Monitor Setup page. 2 Use the cursor buttons to select the parameters, and use the Parameter wheel, INC/DEC buttons, and [ENTER] button to set them. SPEAKER SETUP: These parameters are for setting the volume balance of the surround monitor speakers. Select the OSC (Oscillator) parameter and choose from PINK NOISE, 500-2K (pink noise through a 500 Hz to 2 kHz BPF), 1K (1 kHz sinewave), or 50 Hz (50 Hz sinewave). Use the ON/OFF button to turn the Oscillator on and off. When on, the Oscillator outputs a signal at –20 dB to the Surround Channels whose icons are highlighted. You can turn on and off Oscillator output for speakers individually. Speaker icons can be selected by using the cursor buttons. The signal phase of the LFE Channel can be reversed by using the SW phase button. When ROTATE is on, the Oscillator signal is output by each speaker in turn in a clockwise direction (3 second signal, 2 second pause). SURR. MODE: This indicates the currently selected Surround mode, which is set on the Surround Mode page (see page 97). MONITOR MATRIX: This is used to select the Surround Monitor Matrix. In 6.1 Surround mode, you can select 6.1, 5.1, 3-1, or ST. In 5.1 Surround mode, you can select 5.1, 3-1, or ST. In 3-1 Sur- round mode, you can select 3-1 or ST. When a down mix Monitor Matrix is selected, you can attenuate signals by using the ATT parameters. You can use the Surround Monitor settings in Stereo mode, but Monitor Matrix is fixed to ST. Note: If you had been monitoring with the surround mode set to 6.1 and the monitor matrix...
Other models in this manual:Musical Instruments - DM2000 (113.09 kb)