Votes - 1, Average rating: 3
(
)
)
|
manual abstract
HDMI control Sub menu: HDMI Ctrl Use this function to link this unit and an HDMI control- compatible TV via HDMI. For details, see “Operating the unit with the TV remote control (.p. 8)”. Selectable item: Off*, On “Off”: Disable the control function. The standby power consumption of this unit decreases. “On”: Enable the control function. Audio playback component Sub menu: Support Use to select a component to play back HDMI audio signals. This setting is effective when “HDMI Ctrl” is set to “Off”. 7) Selectable item: YRS*, Other “YRS”: Play back the input sound signal. “Other”: Play back the equipment connected to HDMI OUT (ARC) jack. 4) y 6) y Set corresponding HDMI IN to “Off” when selecting HDMI IN. Example: When connecting this unit and PC 1 Connect DVI output jack of the PC and HDMI IN 3 using DVI .. 5) y HDMI converter cable. The selectable item for other digital sound input jack already selected 2 Connect a sound output jack of the PC and AUDIO INPUT 3 jack will not be displayed. (Ana). 3 Set “Ana” of “Input Assign” to “HDMI3”. 4 Set “HDMI3” of “Input Assign” to “Off” 7) y HDMI video signals input to one of the HDMI IN jacks of this unit are always output from the HDMI OUT (ARC) jack of this unit. 21 En PREPARATION CONNECTION/ INITIAL SETTINGS PLAYBACK TROUBLESHOOTING ABOUT THIS UNIT EnglishSETTINGS Setup menu Brightness of the front panel display Menu: Front Display Use to adjust the brightness and display settings of the front panel display. Standard dimmer Sub menu: Std Dimmer Use to adjust the brightness of the front panel display when you operate this unit. The front panel display dims as the number becomes small. Selectable item: -2, -1, Off* (brightest) Auto dimmer Sub menu: Auto Dimmer Use to adjust the brightness of the front panel display at normal time (unit/remote control without operation) based on setting value of the “standard dimmer”. The front panel display dims as the number becomes small. Selectable item: Disp. Off (hide), -3, -2, -1, Off* (brightest) 22 En Advanced setup 4Press ../ .. to select the desired menu on the front panel display and then press ENTER key. 1) 5Change setting by pressing ../.. key. 2) 6Press key to set this unit to the standby mode. The new setting will be reflected when you turn on the unit by pressing key. 1Press key to turn this unit to standby mode. 2While holding down INPUT key on the front panel, press key on the remote control to turn on the power. “ADVANCED SETUP” appears in the front panel display. 3 3 Release INPUT key on the front panel. Menu Description Selectable item/ Adjustable range TURN ON VOLUME Sets volume level at power-on. Off* (Not set), 01 to 99, MAX (Maximum) MAX VOLUME SET Sets maximum volume. 01 to 99, MAX* (Maximum) PANEL INP. KEY Enables/disables the INPUT key on the front panel. P.INPUT: ON* (Enabled), P.INPUT: OFF (Disabled) F.PANEL. KEY Enables/disables the keys on the front panel. P.INPUT: ON* (Enabled), P.INPUT: OFF (Disabled) R.INPUT POWER Enables/disables power-on by remote control input keys when the unit is in standby mode. R.INPUT PW: OFF* (Disables power-on), R.INPUT PW: ON (Enables power-on) AC ON STANDBY Sets whether or not this unit returns to its previous state when AC power is restored after a temporary power loss. AC STANDBY: OFF* (Restores the state before power was lost), AC STANDBY: ON (Enters standby mode) FACTORY PRESET Resets all settings to their default values, except settings in ADVANCED SETUP. PRST: CANCEL* (Reset is not performed), PRST: RESET (Reset is performed) 1) y To return to the previous menu, press RETURN key. 2) y The default settings are marked with “*”. PREPARATION CONNECTION/ INITIAL SETTINGS PLAYBACK TROUBLESHOOTING ABOUT THIS UNIT EnglishSETTINGS 23 En TROUBLESHOOTING TROUBLESHOOTING Troubleshooting Troubleshooting Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the AC power supply cable, and contact the nearest authorized Yamaha dealer or service center. General Problem Cause Remedy See page This unit does not The internal microcomputer has been Set this unit to the standby mode, disconnect the operate properly. frozen by an external electric shock (such as lightning or excessive static electricity) AC power supply cable, plug it back in after 30 seconds, and use it normally. – or by a power supply with low voltage. This unit fails to turn on when key is pressed, The AC power supply cable is not firmly connected to the AC wall outlet. Connect the AC power supply cable firmly to the AC wall outlet. 6 or enters the standby mode soon after the power has been turned This unit has been exposed to a strong external electric shock (such as lightning and strong static electricity). Set this unit to the standby mode, disconnect the AC power supply cable, plug it back in after 30 seconds, and use it normally. – on. This unit suddenly The...