Votes - 4, Average rating: 4.3
(
)
)
|
Other manuals for this model:
manual abstract
Press ST+3BEAM to select Stereo plus 3 Beam. ST+3BEAM 2 Note The front left and right sound beams are output directly toward the listening position. 3 Beam Outputs sound beams from the front left and right and center channels. This mode is ideal for enjoying movies with the whole family. Because the listening position area is widened, you can enjoy excellent quality surround sound over a wider area. In addition, you can use this mode when the listening position is close to the backside of the wall, and the surround left and right sound beams cannot be reflected off the wall. Press 3BEAM to select 3 Beam. 3BEAM y You can achieve a more realistic surround effect if you adjust settings for IMAGE LOCATION in BEAM MENU (see page 61). Notes • When you play back multi-channel sources, surround left and right signals are mixed down and output from the front left and right channels. • The front left and right sound beams are output toward the walls in your listening room. • “SP Pos. Corner!” appears in the front panel display if INSTALLED POSITION is set to ANGLE TO WALL OR CORNER (see page 58). My Surround This mode enables surround system in a small listening area which may not fulfill the listening room conditions for other beam modes (see “Before installing this unit” on page 13). Use this beam mode when you want to enjoy surround sound near this unit, or when the other beam modes are unavailable. Press MY SUR. to select My Surround. MY SUR. 6 Notes • Beam mode settings such as beam angles and distances are ineffective in this mode. • For the full effect of My Surround, your listening position must face toward the front of this unit. BASIC OPERATION 3 English 45 En Enjoying surround sound Enjoying surround sound Decoder indicators Depending on the input source and the selected surround mode, the decoder indicators in the front panel display light up as follows: Status Indicator When PCM signals are being input PCM When DTS digital signals are being input or DTS Neo:6 is selected as the surround mode When Dolby Digital signals are being input DIGITAL When Dolby Pro Logic is selected as the surround mode PL When Dolby Pro Logic II is selected as the surround mode PL y • You can select an input mode (AUTO, DTS, or ANALOG) by pressing INPUTMODE repeatedly (see page 70). • Discs encoded in DTS-ES, Dolby Digital 5.1 EX, Dolby Digital EX, or Dolby Digital Surround EX will be played back in DTS or Dolby Digital. ¦ Surround modes and recommended sources Surround mode Recommended source DTS Neo:6 Cinema Music Movies Music Dolby Pro Logic – All sources Dolby Pro Logic II Movie Music Game Movies Music Games Notes • When you select an input source (see page 41), the surround mode used for the previously selected input source is automatically selected. • If the power of this unit is turned off and on again, the surround mode used for the previously selected input source before the power was turned off is automatically selected. • If the surround modes are not available, “Prohibit” appears in the front panel display when you press SUR. DECODE. • The surround modes are available: – when the beam mode is set to a setting other than the stereo playback (see page 50), My Beam (see page 51), and My Surround (see page 45). – when 2-channel signals are being input. 46 En Enjoying surround sound Enjoying surround sound This unit can decode 2-channel sources for 5.1-channel playback so that you can enjoy a variety of surround sound effects by switching the surround mode. y The beam mode must be set to 5 Beam, Stereo plus 3 Beam, or 3 Beam (see page 44). 46321+1007895STEREO MY BEAM CH LEVEL MENU RETURNTEST 5BEAM ST+3BEAM 3BEAM YSP TV/AV ENTER SUR. DECODE MY SUR. 2 Press SUR. DECODE repeatedly (or press SUR. DECODE and then press / ) to switch between surround modes. Choices: Neo:6 Cinema, Neo:6 Music, PRO LOGIC, PLII Movie, PLII Music, PLII Game Default setting: Neo:6 Cinema SUR. DECODE or SUR. DECODE ENTER Neo:6 Music 1 Set the operation mode selector to YSP. Neo:6 Cinema YSP TV/AV PRO LOGIC BASIC OPERATION PLII Movie PLII Music PLII Game English 47 En Enjoying surround sound Enjoying surround sound You can enjoy analog audio signals output from your TV in real surround sound. y Before performing the steps below, set the volume of this unit to 30. If necessary, adjust the volume level in step 4 below. 46321+1007895STEREO MY BEAM SLEEPINPUTMODE CH LEVEL MENU RETURNTEST TV VOL VOLUME 5BEAM ST+3BEAM 3BEAM VOL MODE AUTO SETUP MACRO TV INPUT2INPUT1 YSP TV/AV CH TV ENTER SUR. DECODE MY SUR. 1 Select the TV channel you want to watch. To select a TV channel, use the remote control supplied with your TV. 2 Set the operation mode selector to YSP. YSP TV/AV 3 Press TV. This unit outputs audio signals from your TV. 4 If you hear sound from your TV speakers, reduce the volume level of your TV until you can no longer hear any audio being output. To reduce the TV volume level, use the remote control supplied with your TV. 5 Press VOLUME +/– to adjust...