Votes - 2, Average rating: 4
(
)
)
|
manual abstract
This function is available for TV/STB, DVD, and AUX. y We recommend setting the input mode to AUTO in most cases. • AV TV |[VCR| II DVD | Il AUX || 13 NPUT1 INPUT2 MACRO VOL MODE SETUP INPUTMODE SLEEP 5BEAM ST+3BEAM 3BEAM 1 2 3 STEREO C4 MY SUR. 5 6 7 8 9 SUR. DECODE 0 [+10] (^| TEST H “ ItwAvI I yspI 3 Press INPUTMODE repeatedly to toggle between input modes. Ri + When DVD is selected as the input source When TV or STB is selected as the input source When AUX is selected as the input source 1 Set the operation mode selector to YSP. I Note 2 Press one of the input selector buttons to select the desired input source. ANALOG is not available as the input mode of DVD and AUX. • AUTO Automatically selects audio input signals in the following priority order: 1) Dolby Digital or DTS 2) PCM 3) Analog y Use this input mode in most cases. • DTS Selects only digital signals encoded in DTS. Compared to AUTO, this input mode provides greater stability while playing back CDs or LDs encoded in DTS. • ANALOG Selects only analog signals. Even when both digital and analog signals are input simultaneously, only analog signals are selected. You can adjust the default input mode to be selected when the power of this unit is turned on by adjusting INPUT MODE in INPUT MENU (see page 60). 68 En Adjusting the system parameters This unit has additional menus that are displayed in the front panel display. These menus offer additional operations to adjust and customize the way this unit operates. Note When “F.PANEL KEY” is set to “F.PANEL: OFF” (see page 70), STANDBY/ON on the front panel is ineffective. Use STANDBY/ON on the remote control instead to adjust the system parameters. Using the system parameters Follow the procedure below to enter the system parameters. 1 Press STANDBY/ON on the remote control to turn off the power of this unit. STANDBY/ON fô/i) 2 Press and hold INPUT on the front panel and press STANDBY/ON on the remote control to turn on the power of this unit. “MEMORY PROTECT” is displayed in the front panel display. STANDBY/ON 3 Release INPUT on the front panel. 4 Set the operation mode selector to YSP. ITV/AVI I YSP I 5 Use ^ ^ to select the parameter to be set, then press ENTER. See the table on page 70 for the types of parameters. 6 Use <| / to select and change the parameter setting. See the table on page 70 for the parameter settings. INPUT INPUT 69 En Adjusting the system parameters Parameter to be changed and front panel display Parameter settings MEMORY PROTECT You can protect the settings you saved in the system memory of this unit from being accidentally erased or unwantedly changed. ON, OFF VOL MAX VOLUME You can set the maximum volume level so that this unit will not output sound beyond the limited volume level. MAX, 99 to 01, MIN Control step: 1 VOL TURN ON VOLUME You can set the initial volume level when the power of this unit is turned on. MAX, 99 to 01, OFF Control step: 1 VOL DEMO MODE You can test the sound beam output from this unit to experience the sound beam. ON, OFF VOL PANEL INP. KEY You can disable the INPUT on the front panel when you adjust the system parameters. ON, OFF VDL F.PANEL KEY You can disable the front panel keys except when you adjust the system parameters. ON, OFF turn off the power to the unit by pressing STANDBY/ON on the VOL remote control, then follow the steps to set the parameter to “ON”. FACTORY PRESET You can reset all of the parameters of this unit to the factory presets. This procedure completely resets ALL the parameters in SET MENU. Note RESET, CANCEL procedure you must run AUTO SETUP again to match your surround VOL 7 Press STANDBY/ON on the remote control to set this unit to the standby mode. STANDBY/ON The new setting will be activated when you turn on the power of this unit next time. To change the system parameter settings, first turn off the power to the unit, then follow the procedure to adjust the system parameters. y When the demo mode is turned on, restart the unit, then press ENTER while playing back sources to test the sound beam. The sound beam being output shuttles between left and right. Press ENTER again to stop shuttling. 70 En Remote control features In addition to controlling this unit, the remote control can also operate other AV components made by Yamaha and other manufacturers. To control other components, you must set up the remote control with the appropriate remote control codes and set the operation mode selector to TV/AV to change the control area. Note Depending on the external AV component you are using, you may not be able to operate the component with the remote control, even if a remote control code is set. In this case, operate the component using the supplied remote control. Setting remote control codes You can control other components by setting the appropriate remote control codes. Codes can b...