Votes - 2, Average rating: 4
(
)
)
|
Other manuals for this model:
manual abstract
Doing so may result in deformation, discoloration, damage or deterioration. • Never leave any materials which are easily color-transferable, such as rubber items, on the drum pad surface. Otherwise, the color of the material may be transferred to the drum pad surface. Be especially careful of this when you store the drum pads. • When cleaning the product, do not use benzine, thinner or alcohol as it may result in discoloration or deformation. Please wipe with a soft cloth or a damp cloth that has been wrung out thoroughly. If the product is soiled or sticky, use a neutral detergent on a cloth then wipe with a damp cloth that has been wrung out thoroughly to remove any remaining detergent. Also pay close attention so as not to let the water and detergent come into contact with the cushions used in the product; doing so may result in deterioration. • Make sure you hold onto the plug, not the cable, when connecting or disconnecting the cable. Also, never place any heavy or sharp objects on the cable. Applying excessive force to the cable may result in damage to the cable, such as the wires being severed, etc. • Do not push or scrape the playing surface of your pad with drum sticks as this may make it less sensitive and/or more difficult to play. 4 TP70S Owner’s Manual Welcome First of all, thank you for purchasing the Yamaha TP70S—a drum pad designed for use with products from the DTX series of Yamaha electronic drum sets. In order to get the most out of your new accessory, please be sure to read this owner’s manual carefully. And after doing so, be sure to store the manual in a safe place so that you can refer back to it again as needed. Package Contents q TP70S pad (x1) w S wing bolt (x1) e Stereo audio cable (.1) r Owner’s Manual (x1; this booklet) *: Rim A and Rim B of the TP70S contain switches in the groove sections. As a result, your drum module can produce different sounds depending on where you strike the pad. q w Rim A Rim B e Pad r TP70S Owner’s Manual 5 Setting Up As shown in the figures, set up your pad on an electronic drum rack or a standard tom stand (such as a Yamaha WS series product). 1. Take the snare pad (q) and the S wing bolt (w) from the package and lightly tighten the S wing bolt (w). (Five or six turns is sufficient.) wq 2. Slide the pad (q) onto the tom holder or hexagonal bolt (e) from the rack or tom stand, and then tighten the S wing bolt (w) to secure it in place. CAUTION If the wing bolt and other fasteners are not sufficiently tightened, your pad may fall, possibly causing injury. It is important, therefore, that you mount your pad securely on the drum rack or stand. In addition, you should avoid placing your rack or stand on an uneven surface as this may cause it to fall over, again increasing the risk of injury. eq w 6 TP70S Owner’s Manual Pads and Trigger Input Jacks The functions that the pad can perform will depend on which of your drum module’s trigger input jacks it is connected to. A chart showing the correspondence between pad functionality and input jack types can be accessed via the web site shown below. Connecting Using the stereo audio cable provided, connect the TP70S pad’s output to a suitable input jack on your DTX series drum module. At this time, ensure that the L-shaped end of the cable is plugged into the [OUTPUT] jack on the TP70S. TP70S DTX series drum module TP70S Owner’s Manual 7 Troubleshooting If the pad produces no sound, proceed as follows. • Ensure that the pad is correctly connected to a suitable input jack on your DTX series drum module using the stereo audio cable provided. If you use a mono audio cable for connection, you will be unable to produce the sounds assigned to the rims. For more troubleshooting tips, refer to the Owner’s Manual that came with your DTX series drum module. If you still cannot find the information you need to resolve a problem, please contact your Yamaha dealer or a customer support center for assistance. Specifications . TP70S Drum Pad • External dimensions: 220 (dia.) x 68 mm (not including S wing bolt) • Weight: 0.9 kg (including S wing bolt) • Sensor System : Trigger sensor (piezo) x 1, rim switch (2zones) x 1 • Output jack: Standard stereo-audio jack *: Specifications and descriptions in this Owner’s Manual are for information purposes only. Yamaha Corporation reserves the right to change or modify products or specifications at any time without prior notice. As specifications, hardware, and optional extras may not be the same in every region, please check with your Yamaha dealer for details. 8 TP70S Owner’s Manual For details of products, please contact your nearest Yamaha representative Pour plus de details sur les produits, veuillez-vous adresser a Yamaha ou au or the authorized distributor listed below. distributeur le plus proche de vous figurant dans la liste suivante. For details of products, please contact your nearest Yamaha representative Pour plus de details sur les produits, veu...