Votes - 3, Average rating: 3.7
(
)
)
|
manual abstract
97-128) that is currently selected. Entering the Song Edit Mode Hold the [SHIFT] button and press the [SONG] button on the front panel. Once the Song Edit Mode is entered, the main page (Tempo, Repeat Playback) shown below will be displayed. SONG .=120 Repeat=off What’s in the Song Edit Mode The Song Edit Mode is divided into the following 9 pages. 1. Tempo, Repeat Playback ..................................... 24 2. Program Change, Bank Select ............................ 24 3. Volume, Pan ......................................................... 25 4. Song Copy ........................................................... 25 5. Quantize ............................................................... 25 6. Clear Track ........................................................... 26 7. Merge Track ......................................................... 26 8. Clear Song ........................................................... 26 9. Song Name .......................................................... 26 Procedure 1. Press the [SONG] button to enter the Song & Tempo display, then select the User Song (No. 97-128) you want to edit. 2. Hold the [SHIFT] button and press the [SONG] button to enter the Song Edit mode. * If the [SHIFT]+[SONG] buttons are pressed when a preset song is already selected, “CAN'T EDIT PRESET SONG” will appear and the Song Edit Mode cannot be entered. 3. Use the [PAGEs]/[PAGEt] buttons to display the page you want to edit. * If the Utility Mode’s [2-4. Jump To Recent Page] (P. 29) parameter is set to “on”, The DTXPRESS II will display the page last edited when entering the Song Edit mode. 4. Use the [SEL<]/[SEL>] buttons to move the cursor to the parameter you want to edit. The parameter will flash. * If there is only one parameter, it is not necessary to move the cursor. 5. Use the [VALUE–]/[VALUE+] buttons to set the parameter’s value or ON/OFF setting. Any settings made in the Song Edit Mode will directly change the settings in the memory of the DTXPRESS II. It is not necessary to use the Store Operation. 1. Tempo, Repeat Playback This function changes the tempo (rewrites the tempo information in the song’s header) and sets the repeat playback of the user song. SONG .=120 Repeat=off q w q q (Tempo) [Range] 30-300 w Repeat (Repeat Playback) [Range] off, on If this is set to “on”, the user song will repeat playback. If this is set to “off”, the user song will play normally. 2. Program Change, Bank Select This function changes the voices that will be used for each MIDI channel in the user song (rewrites the voice information in the song’s header). This program change will be transmitted when a song is selected and when song playback is stopped. SONG Ch 1=off PCNo=---V=----- e r wq q MIDI Channel [Range] Ch1-Ch16 w Program Change Transmit On/Off on: Transmits. off: Does not transmit. e PCNo (Program Change Number) [Range] 1-128 rV (Bank Select) [Range] meldy, drumV Sets the bank that will be switched. meldy: Transmits the melody voice program change (MSB=0). drumV: Transmits the drum voice program change (MSB=127). Song Edit Mode Song Edit Mode Volume, Pan This function changes the volume and pan settings for each MIDI channel in the user song (rewrites the Voice information in the song’s header). This control change will be transmitted when a song is selected and when song playback is stopped. SONG Ch 1=off Vol= ---Pan=--- e r q w q MIDI Channel [Range] Ch1-Ch16 w Control Change transmit On/Off on: Transmits. off: Does not transmit. e Vol (Volume) [Range] 0-127 r Pan [Range] 0-127 4. Song Copy This function copies the assigned song q to the user song that is currently selected. SONG Copy from= 1HighRise q When the Song Copy operation is carried out, all data in the User Song that is currently selected will be replaced with data of the copy source. q from (Copy Source) [Range] 1-127 Sets the song that is the copy source. The song number and name will be displayed. A preset song or a user song can be assigned. Procedure 1. Assign the Copy Source Song on the display shown above, press the [SAVE/ENT] button. The following display will appear asking for confirmation before the copy operation is carried out. CopySONG From 1 Are you sure ? 2. Press the [SAVE/ENT] or [VALUE+] button, the copy operation will be carried out. * Press the [VALUE-] button to cancel the copy operation. * During song playback, the copy operation cannot be carried out. “ERROR SEQ is Running” will appear. Stop the song and try the copy operation again. * If memory is insufficient when in the copy operation, “ERROR Memory Full” will appear. Clear any unnecessary user songs and try the copy operation again. When the copy operation is complete, “Complete!” will appear. 5. Quantize This function quantizes each track qof the user song to the accuracy w defined here. quantize: When the timing of the sequence data that was recorded is inaccurate, this function is used to correct the timing. The accuracy for correcting can be ...