Votes - 2, Average rating: 4
(
)
)
|
Other manuals for this model:
manual abstract
_QIX500 EBBur HUG-B1-H 3. Set the trigger setup with the parameters listed below. The parameters should be different for each number which you’ve checked at procedure 2 above. XP70 Number = 1.00 Number = 1.10 Number = 1.20 TRG2=Type For Snare : SN-1 For Tom : TM-1 For Snare : SN-4 For Tom : TM-4 For Snare : SN-7 For Tom : TM-7 TRG3=Gain,MVl Gain*1 Gain*1 Gain*1 TRG4=VelCurve loud2 norm norm XP80 Number = 1.00 Number = 1.10 Number = 1.20 TRG2=Type For Snare : SN-1 For Tom : TM-1 For Snare : SN-4 For Tom : TM-4 For Snare : SN-6 For Tom : TM-6 TRG4=VelCurve loud1 norm norm PCY100 Number = 1.00 Number = 1.10 Number = 1.20 TGR2=Type CY-1 / CY-2 / CY-3*2 CY-1 / CY-2 / CY-3*2 CY-1 / CY-2 / CY-3*2 TRG4=VelCurve norm norm norm *1 In case if you feel the XP70 wouldn’t sound when you hit it softly, please increase the value of the parameter “Gain” in TGR3 = Gain, MVl. *2 “CY-1” is the setting that the sensitivities of the three sections(Bow / Edge / Cup) are the same. “CY-2” is the setting that the sensitivity of the Edge section is set fairly lower than the other section. “CY-3” is the setting that the sensitivity of the Cup section is set fairly lower than the other section. APPENDIX : How to setup the trigger setup settings? 1. Press the [SHIFT] + [DRUM KIT] buttons to call up the Trigger Setup Select page (TRG1). The currently selected Trigger Setup is indicated in the display. * If you want to edit a different trigger setup, use the jog dial and select the setup here. 2. Press the [<]/[>] buttons to change pages(TRG2 through TRG8) and move the flashing cursor to the parameter you want to set. *To select the Trigger Input (input jack) you want to edit, simply hit the pad you want to edit or use the [SHIFT] + [<]/[>] buttons. 3. Rotate the jog dial to change the setting as listed in the tables above. 4. Press the [SAVE/ENTER] button. 5. Rotate the jog dial to select the destination trigger setup number (8-11). *If you want to change the Trigger Setup name, press the [<]/[>] buttons to move the flashing cursor to the character you want to edit, then rotate the jog dial to select a character. 6. Press the [SAVE/ENTER] button again. A prompt appears asking you to confirm the Store operation. 7. Press the [SAVE/ENTER] button once more to actually execute the Store operation. *For more information, please refer to the ...
Other models in this manual:Musical Instruments - DTX500K (36.78 kb)
Musical Instruments - DTX520K (36.78 kb)
Musical Instruments - DTX530K (36.78 kb)
Musical Instruments - DTX540K (36.78 kb)