Votes - 3, Average rating: 3.7
(
)
)
|
Photos and specs Roland VR-760 |
manual abstract
20). For more detailed information on the settings stored in the registrations, refer to p. 100. Using the Advanced Functions 3. Press the [ENTER] button. The save begins, and a message appears in the display. In the above example, the current settings are stored in Registration 23. If you do not want to store the settings in a registration, press the [EXIT] button. The Basic screen returns to the display. When saving to the registration is completed, a message indicating that it is completed appears in the display, and the Basic screen returns to the display. Simple Method for Storing to Registrations You can store settings quickly by holding down the [WRITE] button and pressing one of the REGISTRATION buttons [1]–[8]. This is convenient when you have already determined the registration number you want to save to. 1. Hold down the [WRITE] button and press the [BANK] button, then press any of the REGISTRATION buttons [1]–[8]. The bank is confirmed. Continue holding down the [WRITE] button. 2. Press any of the REGISTRATION buttons [1]–[8]. The settings are stored to the specified registration number. When the process is finished, a message indicating that it is completed appears in the display. 3. Release the [WRITE] button. When saving to a registration in the same bank, use the following procedure to store the settings. 1. Hold down the [WRITE] button and press a REGISTRATION button [1]–[8]. When the save is finished, a message indicating that it is completed appears in the display. Using a Control Pedal You can connect a pedal switch (such as the optional DP-2) to the CONTROL PEDAL jack on the VR-760’s rear panel to switch the rotary effect, switch registrations, control the piano soft effect, turn external sequencers on and off, and control other functions (p. 66). Connecting an expression pedal (the optional EV-7) allows to use the pedal to control the organ overdrive and D Beam functions. You can set the function assigning to the control pedal (p. 66). NOTE Never turn off the power while a REGISTRATION is being saved. Doing so may damage the unit. With certain pedals, the action performed when you press or release the pedal may be reversed. In such instances, switch the control pedal polarity so that the pedal functions properly (p. 65). NOTE Use only the specified expression pedal (EV-7; sold separately). By connecting any other expression pedals, you risk causing malfunction and/or damage to the unit. Advanced 55 Using the Advanced Functions Saving to the Memory Card With the VR-760, you can take all of the content in the registration and the system settings and save them as a single file to a memory card (CompactFlash). * When using memory cards, first turn the VR-760’s power off, then insert the memory card in the MEMORY CARD SLOT as shown in the figure below. * Carefully insert the card in the direction indicated by the arrow. * Make sure that the card is fully inserted in the slot. * Do not touch or allow metal to come into contact with the contact portion of the cards. * Never insert or remove a CompactFlash card while the VR-760’s power is on. Doing so may corrupt the VR-760’s data or the data on the CompactFlash card. * When using cards, make sure they are correctly oriented when inserted. * For more information and precautionary notes on handling memory cards, refer to the card manual. * Be careful not to damage the contact portion of the cards. * Cards are made to be insert in only one way. Do not force the cards into the slot. * These cards are precision devices; do not bend or drop them or subject them to strong shock or vibration. * The cards cannot be altered or disassembled. * These cards are precision devices; handle them carefully, and pay attention to conditions of temperature and humidity. In particular, do not use in conditions where water may condense on the surfaces. * To prevent damage to the cards from static electricity, be sure to discharge any static electricity from your own body before touching cards. * Do not save data where static electricity or electrical noise is being generated. * Do not place a card in any device if the card is dusty or dirty. * Always be sure to back up the data on cards. * Memory cards require formatting before they are used. NOTE Memory cards require formatting before they are used. NOTE Parameter settings are all saved together in one file. You cannot save or load any one registration individually. 57 Using the Advanced Functions Advanced Functions ¦ Formatting the Memory Card for the VR-760 (Format) This function initializes (formats) a memory card so that VR-760 data can be saved to it. Before a new memory card or a memory card used on another device can be used on the VR-760, it must be formatted on the VR-760. 5-15(FormatCard) 1. Hold down the [EDIT] button, and press the REGISTRATION [7] (UTILITY) button. The Edit’s “UTILITY” screen is displayed. 2. Press CURSOR [ ] button to display the following screen. fig.05-15(FormatCard) 3. Press the [...