Votes - 3, Average rating: 4
(
)
)
|
manual abstract
Multiple bytes of data are transmitted interval monitoring will be halted. in order starting from the address. :: ffH Data sum Checksum ¦System Exclusive Message F7H EOX (End Of Exclusive) * Following System Exclusive Messages cannot be recorded. * The amount of data that can be transmitted at once time will depend on the type of data, and data must be requested using a specific starting address and size. Status Data byte Status Refer to the Address listed in 3. Parameter address map (p. 10). F0H iiH, ddH, ......, eeH F7H * If “Data Set 1” is transmitted successively, there must be an interval of at least 40 ms. F0H: System Exclusive Message status * The [SETUP]-[MIDI]-[GLOBAL] Device ID setting is used as the Device ID. ii = ID number: an ID number (manufacturer ID) to indicate the manufacturer * Regarding the checksum please refer to p. 12. whose Exclusive message this is. Roland’s manufacturer ID is 41H. ID numbers 7EH and 7FH are extensions of the MIDI standard; Universal Non-realtime Messages (7EH) and Universal Realtime Messages (7FH). dd,..., ee = data: 00H - 7FH (0 - 127) F7H: EOX (End Of Exclusive) The System Exclusive Messages received by this device are; Universal Nonrealtime System Exclusive Messages and Data Set 1 (DT1). MIDI Implementation 2. Transmit data * When [SETUP]-[MIDI]-[GLOBAL] Soft Thru is set to “ON”, messages received in addition to the following messages are also sent. ¦Channel Voice Messages * The following channel voice messages are transmitted on the channel specified as the [SETUP]-[MIDI]-[MIDI CH] Tx/Rx Channel. * Not transmitted when [SETUP]-[MIDI]-[MIDI CH] Tx/Rx Switch is set to “OFF.” * When [SETUP]-[MIDI]-[GLOBAL] Local Control is set to anything other than ON (PERC), messages are transmitted over the channel assigned to the drum part when the pad is played. When set to ON (PERC), messages are transmitted over the channel assigned to the percussion part. * When [INST]-[CONTROL]-[MIDI] Tx Channel is set to anything other than GLOBAL, messages are transmitted over the channels assigned to each pad in the drum kit (when Local Control is set to ON (DRUM)). * Pressing the Preview switch transmits the same message sent when the corresponding pad is struck. .Note Off Status 2nd byte 3rd byte 8nH kkH vvH n = MIDI channel number: 0H - FH (ch.1 - ch.16) kk = note number: 00H - 7FH (0 - 127) vv = Note off velocity: 40H (64) fixed * In the channel assigned to the drum part (or percussion part), after a pad is struck or the hi-hat control pedal is in the foot closed (splash) position, Note Off is transmitted after the interval set in Gate Time ([INST]-[CONTROL]-[MIDI] or [INST]-[CONTROL]-[HH MIDI]). * When a brush sweep is played on the SNARE pad with the [KIT]-[FUNC][ BRUSH] Brush Switch set to ON, the corresponding note number set by means of [INST]-[CONTROL]-[BR MIDI] Brush Note No. is transmitted over the channel assigned to the drum part. * When cross sticks are played on the SNARE pad with the [KIT]-[XSTICK] XStick Switch set to ON, the note number set by means of [INST]-[CONTROL]-[BR MIDI] XStick Note No. is transmitted after the gate time over the channel assigned to the drum part. * Transmitted only when the device is in play for pattern in which Note Off is recorded. .Note On Status 2nd byte 3rd byte 9nH kkH vvH n = MIDI channel number: 0H - FH (ch.1 - ch.16) kk = note number: 00H - 7FH (0 - 127) vv = note on velocity: 01H - 7FH (1 - 127) * In the channel assigned to the drum part (or percussion part), after a pad is struck or the hi-hat control pedal is in the foot closed (splash) position, the note number set for the drum kit is transmitted. * When a brush sweep is played on the SNARE pad with the [KIT]-[FUNC][ BRUSH] Brush Switch set to ON, the corresponding note number set by means of [INST]-[CONTROL]-[BR MIDI] Brush Note No. is transmitted over the channel assigned to the drum part. * When cross sticks are played on the SNARE pad with the [KIT]-[XSTICK] XStick Switch set to ON, the note number set by means of [INST]-[CONTROL]-[BR MIDI] XStick Note No. is transmitted over the channel assigned to the drum part. * In the channel assigned to the drum part, the note number transmitted when the hi-hat pad is struck (open, closed) switches with the value set with [SETUP][ MIDI]-[CTRL] HH Note# Border setting (the Pedal CC Control value) in accordance with the degree to which the hi-hat pedal is pressed. * Transmitted only when the device is in play for pattern in which Note On is recorded. .Polyphonic Key Pressure Status 2nd byte 3rd byte AnH kkH vvH n = MIDI channel number: 0H - FH (ch.1 - ch.16) kk = note number: 00H - 7FH (0 - 127) vv = value: 00H, 7FH (0, 127) * On the channel assigned to the drum part, 7FH will be transmitted when the rim of the pad is pressed and 00H will be transmitted when the rim is released, for the note number specified for the head and rim. (When using a choking- compatible pad and [TRIGGER]-[BASIC] Trig Type is set to the corresponding pad.) * Tr...