Login:
Votes - 2, Average rating: 4 ( )

User manual Roland, model RC-2

Manafacture: Roland
File size: 1.83 mb
File name:
Language of manual:
Free link for this manual available at the bottom of the page



Other manuals for this model:

manual abstract


6. Press the pedal to stop recording. Playback of the recorded phrase begins simultaneously. 7. If you want to press the pedal. Pressing the pedal toggles overdubbing modes. * You can undo and redo the overdubs p. 15). 8. When you are finished with overdubbing, press the pedal * Be sure to press the pedal two times within second. * For more details on saving, refer to “Saving Phrases (WRITE)” (p. 32) . 20 Creating Loop Phrases by Recording Audio from a CD/Digital Audio Player * For instructions on how to stop playback, refer to “Technique for Stopping Operation” (p. 6). AUX IN 5. Press the pedal to switch to recording standby mode. Lights in red 3. Play back the CD or digital audio player, and adjust the volume. 6. Play back the CD or Digital audio player (recording begins). 4. Cue up the CD/digital audio player to the desired location and pause playback. Flashes rapidly in red Press twice Light goes off 8. Press the pedal twice to stop playback. Lights in green 7. Press the pedal to stop recording (the phrase plays back after you stop). 2. Turn the MODE knob to AUTO. 1. Select an empty phrase track. Creating Creating . Turn the PHRASE empty phrase track The LOOP/ONE SHOT phrase track is empty. If tracks, or when the LOOP/to indicate that the memory is phrases to free up some memory p. 33). 2. Set the MODE knob to AUTO. 3. While playing the desired audio CD/digital audio player, adjust its volume the sound is not distorted. If you wish to set the tempo before recording, press TAP TEMPO button several times in time with the tempo of the phrase you are going to record. * For more details on setting the tempo, refer to “Setting the Tempo” (p. 35) . * If you are recording a phrase with a time signature other than 4/4, set the time signature now ( p. 36) . 4. Cue up the CD/digital audio player to the desired start location and pause playback. This puts the CD/digital audio player into playback standby mode. 5. Press the pedal to put the RC-2 in recording standby mode. The REC/PLAY/Pressing the pedal standby cancels recording. 6. Start playback of the The RC-2 starts recording as soon * Recording may stop before you are s memory runs out. If this occurs, delete phrases ( p. 33) and try the operation again. 7. Press the pedal to stop recording. Playback of the recorded phrase begins simultaneously. * If the tempo has been set, Loop Quantize automatically adjusts the phrase length to the nearest measure unit at time the pedal is pressed. (“Loop Quantize”; p. 34). Because of this, a certain amount of time may be required from when you press the pedal until recording stops. * The minimum length of time required for a loop phrase is approximately 1.5 seconds. If the phrase you’ve recorded is shorter than that, the length of the phrase will be adjusted automatically, and then recording will stop. * The procedures described here use the RC-2’s AUTO mode to begin recording automatically when audio input is received. As an alternative, you ca...

Other models in this manual:
Musical Instruments - RC-2 (1.83 mb)
Musical Instruments - RC-2 (1.83 mb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category