Votes - 2, Average rating: 4.5
(
)
)
|
manual abstract
More than two effect units can be simultaneously switched on or off. Also, by storing the set of the units in the carrying case (BCB-6), you will be released from the trouble to set them up each time you use them. 9 V Output jack*' Signal Output «_ Jack Indicator Send Jack«—I|4*send return AC Adaptor Jack Guitar Input Jack Return Jack Pedal Switch' Pouuer Supply Er master Switch --PSÍTV5 THUMB SCREW AC Adaptor Jack The BOSS AC Adaptor should be connected to this jack 9 V Output Jack A parallel DC cord should be connected to this jack to supply power to each effect unit. Guitar Input Jack This jack is to connect an electric guitar or an electronic musical instrument to. Signal Output Jack fused to turn on or off the Power as well) This jack is to supply signal to amplifier. Send Jack (used to turn on or off the Power as well) This )ack is to send the signal from the Guitar Input Jack to the effect units. Return Jack This jack is to input the signal processed by effect unit. Indicator This turns red when the effect is ON and turns green when OFF. If this does not light up or lights only dimly, the PSM-5 is being overloaded. Pedal Switch By using this, you can select direct sound (effect OFF) or processed sound (effect ON). Thumb Screw Operations 1 Connect the effect units to the PSM-5 as instructed below. Turn the effect units on. Step on the Pedal Switch of the PSM 5 to turn the effect ON. (The indicator turns red.) Set each knob of the effect units to the appropriate level. ? * Cmm CHECK 5 Each effect unit can bo turned on or off individually by using its pedal switch. If more than one effect uni! is used, you can turn all the effects on or off with the Pedal Switch of the PSM-5. Cautions • Use the BOSS AC Adaptor PSA 120, 220 or 240 depending on your country's voltage system • Cap the DC plug not in use to prevent its metal part from short circuiting. • When the PSM-5 is not to be used for a long time, disconnect the AC Adaptor from the wall outlet. • Avoid u s i n g the PSM 5 in t h e p I a c e o f dust, heat or humidity. Connections AMPLIFIER BOSS AC ADAPTOR LEAD GUITAR BASS GUITAR irnnnrm’Tr ■----- KEYBOARD CHECK BEFORE CALLING FOR THE REPAIRS None of the effect units works. |l) Check if the indicators ol the effect units hghl | 2) Check il the connections are correctly made CHECK 31 Check, if the indicator of the PSM-5 is turned red The indicator is turned red j—[The indicator does not hght up The indicator lights up but only dimly There is something wrong with the connecting cord By checking in the same way as@, you can find out the effect unit whose current requirement ts particularly large Ilf the total current comes to more than 200mA, the effect units do not operate properly ) 1) Check ¡f the DC plug of the AC Adaptor is connected to the AC Adaptor Jack of the PSM-5 2) Check i) the AC Adaptor is connected to the wall outlet if the indicator does not light up even though the connections are correctly made, pull out the AC Adaptor from the wall outlet and check the following points Pull out the parallel DC cord from the 9V OUTF’UT Jack, then con nect the AC Adaptor to the wall outlet The indicator does not light up The indicator turns red 1 9V OUT O CHECK The PSM 5 or the AC Adaptor needs repanng Connect the parallel DC cord only to the PSM-5 (A) Tr _ y connecting each effect unit to the PSM-5 If the indicator of the PSM-5 goes out or turns dimmer, the effect unit is out of order The parallel cord needs changing Exchange the parallel DC plug of the improper effect unit with that of the proper one. The effect unit does not workl f The effect unit needs repairing The effect unit works There is something wrong with the parallel DC cord ( 11 l . j iJL'l OOiO ÎUËRoland® 2603083700 UPC 2603083700 Dimensions Weight........ Accessories. Specifications Power......9V DC 200mA, (Use only AC Adaptor PSA-120, PSA-220 or PSA 240) Current Draw......Master Switch section: 9V DC 13mA Input Impedance......GUITAR: 1 M12 RETURN: 1 MU Output Load Impedance...... AMP section: over 10ki2 SEND section: over 10 Gain......Unity Frequency Response......10Hz~ 100kHz {- 3dE>) Others......Effect ON/OFF Select Switch (FET switching system), Indicator Jacks......Input (GUITAR) Output (AMP) Send Return Specifications are subject to change without notice. D1 70(W)x55(H)x125(D) mm (2-3/4"x2-1 /4"x5") 340g(12 oz) Parallel cord ......... 1 AC Adaptor.......... 1 AC - Adaptor PSA- 120 PSA- 220 PSA- 240 Power Requirement 117V- AC 220 V-AC 240 V-AC Output Voltage 9V-DC 9V-DC 9V-DC Maximum Output Current 200 mA 200 mA 200 mA Weight 230 g (8 oz) 2-30 g ( 10 oz) 280 g ( 10 oz) Products of Roland 26...